Acme Lift Co.
Acme's Manlift large scissor-lift platforms reach heights of 68 to 105 feet. The S6899 unit has a maximum work height of 75 feet, a platform capacity of 2,200 pounds and a platform size of 91 inches by 17 feet, 6 inches. All models are equipped with Deutz diesel engines, feature a triple-scissor mechanism for rigidity and provide easy service access.
Circle 173 on Reply Card ▸ freeproductinfo.net/rer
SkyJack
SkyJack introduces the 7135 mid-size RT of the SJ 600 series that comes equipped with a dual fuel (gas/propane) engine on a roll-out tray. The unit is drivable at full height, comes standard with 2-wheel drive with “Detroit Locker” differential, and has a 110VAC GFI outlet on the platform. The 7135 has a working height of 41 feet, a raised platform height of 35 feet, and weighs 8,350 pounds. Other standard features include a motion alarm, operator horn, flashing light, hinged railings, and a spring-loaded full height gate at the rear.
Circle 174 on Reply Card ▸ freeproductinfo.net/rer
Ingersoll-Rand
Ingersoll-Rand offers the VR-1056C telescopic material handler designed with a 56-foot lift height and a 40 ½-foot forward reach. The VR-1056C features Ingersoll-Rand's patented rear axle stabilization system. It allows operators to extend the boom to its fullest reach without stabilizer deployment, and it carries 6,000 pounds to 56 feet with stabilizers and 4,000 pounds to the top without stabilizers. It is also powered by the Tier II Cummins QSB4.5 engine with electronic controls that improve power management.
Circle 175 on Reply Card ▸ freeproductinfo.net/rer
Genie Industries
Genie's TZ-34/20 trailer mounted articulating boom has a new telescopic primary boom that provides a working height of 40 feet and a working outreach of 20 feet. The TZ-34/20 was designed to fit any level of operator experience and tows behind most vehicles using a Class 2 hitch. It is well suited to the rental industry because it can fit through a double door and is light enough for jobs with sensitive floor loading requirements. It can also be set-up on a 12-degree slope. The hydraulic manifold and key electrical components are centrally located on one side of the machin to ease serviceability.
Circle 176 on Reply Card ▸ freeproductinfo.net/rer
OmniQuip Textron
OmniQuip Textron introduces the 3-foot truss boom with a maximum lift capacity of 4,000 pounds for use on both its Lull and Sky Trak brands of telehandlers. The truss boom mounts directly to the telehandlers. The winch is controlled by an auxiliary hydraulic line on the host machine. In addition to its 4,000-pound lift capacity, the winch features hydraulic motor control for smooth and precise load handling, an oil-cooled automatic brake for safe materials handling, and 65 feet of 7/16-inch steel cable for long life in a variety of applications that demand varying reach requirements.
Circle 177 on Reply Card ▸ freeproductinfo.net/rer
JLG
The 1250AJP ultra boom aerial work platform from JLG Industries is an articulating and telescoping model with 63 feet, 2 inch horizontal reach, 60 feet, 7 inch up and over capability and 125 feet platform height. The JibPlus jib boom rotates both 130 degrees vertically and 125 degrees horizontally, and when combined with the 180 degrees platform rotation, provides workers with maneuverability for reaching hard to access areas. Platform capacity in the majority of the work envelope is a restricted 1,000 pounds, while unrestricted platform capacity is 500 pounds. The standard SkyPower package is comprised of a 7,500-watt generator that provides power to welders and other platform-mounted accessories.
Circle 178 on Reply Card ▸ freeproductinfo.net/rer
Snorkel
Snorkel introduces the AB50J articulating telescoping boom with a platform height of 50 feet, a stowed height of 6 feet, 11 inches, and a horizontal reach of 28 feet. The unit has a proportional ramp-on control for drive, a variable speed controlled boom and platform functions, and automatic braking. The AB50J comes equipped with a printed circuit board with on-board LED diagnostics, 180-degree hydraulic platform rotation, and 12-volt emergency operated power. Other options include platform work lights, a flashing light, a drive motion alarm, and a sandblast protection kit.
Circle 179 on Reply Card ▸ freeproductinfo.net/rer
Star Industries
Star Industries introduces the Quick-Tach truss boom that is designed with rugged construction for increased durability for easy transportation. Available in 12-foot or 15-foot models, they provide the additional reach needed to set trusses and other materials on a large structure with less labor. The 2,000-pound rating provides ample load capacity. The low profile design permits transporting the truss boom underneath the forklift on the same trailer.
Circle 180 on Reply Card ▸ freeproductinfo.net/rer
Pinguely-Haulotte
The HA 32 PX articulated platform from Pinguely-Haulotte is designed with hydraulic differential lock and extending axles. The machine has a maximum horizontal outreach of 69 feet, 11 inches and a ground clearance of 15 inches. It comes equipped with standard 4-wheel drive and steer and is powered by a Perkins diesel engine. The HA 32 PX has a working height of 32 feet, a turntable rotation of 360 degrees continuous, and weighs 20,900 kg.
Circle 181 on Reply Card ▸ freeproductinfo.net/rer
UpRight
The LX50 scissor lift from UpRight has proportional controls for quick and easy maneuvering. The heavy-duty elevating linkage provides sturdy platform at working heights up to 56 feet. The LX50 has an exceptionally tight turning radius, a large platform area for tools and materials, oscillating front axle on 4-wheel drive, and a five-year structural warranty. Low retracted height assures easy on/off access and simplifies material loading.
Circle 182 on Reply Card ▸ freeproductinfo.net/rer
IMT Co.
Iowa Mold Tooling Co. presents the 2820 telescopic crane developed to meet the needs of small contractors and equipment dealers. The IMT 2820 is rated at 28,000 foot-pounds, and has a maximum lift capacity of 6,000 pounds and features 400 degrees of rotation. The model is capable of handling common equipment components, such as engines in off-highway applications. Propane tanks may be handled efficiently with this crane. The machine also has a maximum horizontal reach of 20 feet, 6 inches and a maximum vertical reach of 21 feet, 6 inches.
Circle 183 on Reply Card ▸ freeproductinfo.net/rer
Grove
Grove introduces the RT800E rough-terrain crane, which features a standard hydraulically installed and removed counterweight. This allows quick removal for transport and fast installation at the job site. The E series cab has tinted glass throughout and a deluxe seat incorporating armrest-mounted hydraulic single-axis controllers. The boom is a 38- to 142-foot, five-section, sequenced synchronized full power megaform boom. A standard 31 to 56 feet offsettable lattice swingaway extension offsets 0 degrees, 20 degrees, and 40 degrees and stows alongside the base boom section. With the swingaway installed, maximum tip height is 205 feet.
Circle 184 on Reply Card ▸ freeproductinfo.net/rer
