Milwaukee Tool introduces the new ROLL-ON 7200W/3600W 2.5kWh Power Supply, to eliminate the common hassles of gas and temporary power on the jobsite.
“Milwaukee has a vision to redefine how users utilize power on a jobsite,” said Jake Van Wormer, group product manager at Milwaukee Tool. “Current power solutions on jobsites often introduce issues such as safety hassles, outlet overcrowding, or breakers tripping, ultimately impacting the amount of work users can get done. As a leader in battery technology, we have taken our foundational knowledge to design ROLL-ON from the ground up, with every component being purpose-built to deliver a power supply solution that drives productivity, efficiency, and safety on the job.”
The new ROLL-ON 7200W/3600W 2.5kWh Power Supply features a non-removable, Redlithium integrated 2.5kWh battery, which provides enough power and run-time to sustain high-demanding, intermittent applications throughout the day, the company says. With the capability to charge to 100 percent in three hours and 25 percent in 35 minutes, the ROLL-ON features pass-through power for the ability to charge and discharge simultaneously. Delivering 7200W of starting power, users experience instantaneous peak power and 3600W of continuous running power to support two to four operators per unit. ROLL-ON is equipped with two 20A GFCI duplex outlets with circuit breakers, one USB-C, and one USB-A to provide power for two 20A corded tools, or a piece of capital equipment while charging batteries and personal electronics. The pure sine wave inverter delivers a clean power output, protecting sensitive electronics.
ROLL-ON offers professionals instant set-up, eliminating the frustrations associated with gas and temporary power. Milwaukee’s new innovative solution eliminates dangerous emissions, pull-starts, and engine maintenance while also reducing extension cords, ultimately enhancing user safety and productivity. Additional hassles related to temporary power, such as outlet overcrowding and wiring or electrical maintenance, are eliminated with the introduction of ROLL-ON to the jobsite, reducing wasted power and spend, and maximizing productivity.
With the ability to be powered anywhere, Milwaukee’s new power supply delivers versatility and productivity for the professional jobsite. Weighing 104 pounds, the unit is 80 pounds lighter than comparable gas generators, according to the manufacturer. It can be used for indoor and temporary outdoor work, eliminating emissions and providing quiet operation. Featuring 9.5-inch all-terrain wheels and an IP54 rating, this power supply is built to withstand site conditions like dirt, dust, and water. Designed with a user-demanded feature set, Milwaukee’s new solution is fully compatible with the PACKOUT modular storage system. Integrated with ONE-KEY™ technology, users are provided the ability for tracking, management, and adjustable charge rate options to maximize outlet usage onsite.
- Starting Watts: 7200W
- Running Watts: 3600W
- Battery Capacity: 2.5kWh
- AC Output: (2) 20A GFCI Duplex outlets with Circuit Breakers
- DC Output: (1) 12W USB-A Port, (1) 60W USB-C PD Port
- Integrated Charger: 400W-1000W
- Dimensions: 28.85 inches x 23.15 inches x 19.95 inches
- Weight: 104 pounds
