Melter/Applicator
The basic design of the Magma Series melter/applicators from Cimline uses a jacketed tank with oil in the inner wall. The oil is heated with a burner and an agitator keeps the melted sealant flowable. A pump moves the sealant through a hose for distribution into the pavement cracks. This pump is mounted at the back of the unit in a heated cabinet for easy maintenance.
Circle 165 on reply card.
Generators
The new line of generators from Ingersoll-Rand delivers more than seven package sizes and ranges from portable units to large back-up power generators, featuring a total of 24 different units. The new series includes 15 higher-end units with a prime output of 50kVA to 563kVA, powered by either a John Deere or Volvo engine depending on the model. Each generator is equipped with the Intellysis control panel. Some advantages of the Intellysis system include extra accurate frequency and voltage reading, multiple language readout, simultaneous information display and a memory that records up to 25 actions for troubleshooting.
Circle 166 on reply card.
Saw Stand
DeWalt's new heavy-duty miter saw stand supports boards up to 16 feet long and is portable enough to carry to and from the work site. Designed to hold larger material with minimal set up time, DeWalt's new DW723 miter saw stand features a mount that works with all brands of miter saws. Weighing 35 pounds, the stand has folding legs that lock in place to provide excellent stability, supporting up to 400 pounds. Upon setup, the miter stand is 36 inches high.
Circle 167 on reply card.
Backhoe Loaders
JCB takes the wraps off a new generation of JCB backhoe loaders from 212S to 217S models, which are designed for even harder work, increased productivity and greater comfort. Greater all around visibility is a key feature of the new cab with increased glass area, repositioned front wiper, 25 percent wider rear opening window and a low floor at the rear, which improves visibility down the trench. Controlling the excavator function becomes more comfortable with the introduction of optional, fully adjustable, seat-mounted servo controls. The 4-speed Synchro Shuttle and 4-speed Powershift offer smoother gear changes as well as a longer working life and improved reliability, and the same is true of the JCB Autoshift 6-speed transmission, which speeds up cycle times with better gear spreads.
Circle 168 on reply card.
Grinder
This 12-inch grinder from Omega has the capability for smoothing, scraping and sanding. Using a floating head and disc leveling feature, the product is designed to provide even wear for maximum disc life. Production can be accomplished up to 1/2 inch from the wall and an adjustable skirt allows dust-free conditions. A 5.5-hp gas engine, efficient torque and disc speed provide maximum output.
Circle 169 on reply card.
Earth Augers
Specifically designed for easy installation of popular termite bait stations, the PC Series Termite Augers from General Equipment include two models — the PC-2EA and the PC-5EA. The PC-2EA accommodates 2-inch-diameter bait stations, while the PC-5EA is designed for the installation of the new, larger 5-inch-diameter stations. Both augers feature replaceable wear parts and a plated finish to minimize corrosion. Optional cup cutters can be used to flush-mount stations where required by location or topography.
Circle 170 on reply card.
Boom Lift
The Model 1350SJP boom lift from JLG Industries is a 135-foot platform height telescoping boom lift. Features on the high reach machine include drive-out extendable axles that facilitate deployment on the job along with 4-wheel drive and steer for ease of job site navigation. The new boom lift also incorporates the JibPlus articulating jib with both a horizontal and vertical range of motion for greater platform maneuverability and ease of transport. Platform capacity is a restricted capacity of 1,000 pounds and an unrestricted capacity of 500 pounds.
Circle 171 on reply card.
Rammers
The MT-55F, MT-65H and MT-84F are innovative 4-cycle Mikasa rammers from Multiquip that offer improvements from top to bottom. Sporting a new look, the rammers feature stronger crankcases, a narrower width to allow greater utilization in trenches and a built-in primary engine air filter to simplify service and maintenance. The units possess the standard features of Mikasa's 2-cycle rammers but have the added benefits of lower exhaust emissions, improved fuel efficiency and lower noise levels. The 4-cycle rammers also do not require premixing of fuel and can be laid down during transport without oil leakage.
Circle 172 on reply card.
Sub-Compact Tractor
The BX22 sub-compact tractor from Kubota features a 22-hp, 3-cylinder, liquid-cooled Kubota E-TVCS diesel engine. These diesel engines feature low noise, low vibration, produce cleaner emissions and have a fuel tank capacity of 5.5 gallons. The model comes standard with 4-wheel drive, heavy-duty 2-speed hydrostatic transmission and a standard rear differential lock. In 4-wheel-drive mode the balanced alignment reduces the likelihood of possible turf damage.
Circle 173 on reply card.
Excavator
The 325C L from Caterpillar weighs about 63,100 pounds and is powered by the Cat 3126B engine. The 6-cylinder, turbocharged and air-to-air aftercooled diesel engine produces 188 net hp. The engine features electronic control and the Cat Heut fuel system for responsive and fuel-efficient operation. The excavator uses the proven open-center, two-pump, negative flow hydraulic system.
Circle 174 on reply card.
Mower
Hustler Turf Equipment adds a certified ROPS for the Z and Super Z mowers. The two-post ROPS even works with the Bac-Vac catcher, adding versatility. Other Z features include tough frame, deck and front caster wheels. Low seat height and best overall machine balance enhance these machines. The mowers offer a choice of 52-, 60- or 72-inch side-discharge decks with power options of 23- or 25-horsepower Kawasaki engines.
Circle 175 on reply card.
