Morbark
Morbark's Beever M18RX is a new lightweight option package for the Beever M18RX brush chipper. Weighing less than 10,000 pounds fully charged with fluids, spare tire and winch, this machine can be towed without a CDL. Other key modifications include the single feed-wheel yoke pivot assembly with TorqMax drive, which maintains dead space between the feed wheel and chipper drum, increasing down-pressure efficiency. The unit is available in horsepower ranging from 140 to 170, with Cummins, Deere or Caterpillar power options.
Reader Service No. 149 • freeproductinfo.net/rer
Rayco
Rayco's newly redesigned 12-inch-capacity chipper offers an economical solution to the rising price of diesel fuel. Weighing less than 4,700 pounds, the unit is powered by an 89-hp GM gasoline engine and equipped with an AutoClutch spring-adjusted clutch. Rayco's exclusive X-charge discharge fan maximizes discharge velocity to prevent plugging. The 20-inch-diameter feed wheel is driven by a planetary hydraulic drive motor with torque to climb over logs and pull in brush.
Reader Service No. 150 • freeproductinfo.net/rer
Great Northern Equipment
Dosko chipper/mulchers from Great Northern Equipment, feature a 3-in-1 flail system. The double-edged flails have been heat-treated to 60 RC hardness, can be sharpened on both sides and are reversible. Both the 13-16T-13H and the 2022-20HE are towable and powered by Honda engines.
Reader Service No. 151 • freeproductinfo.net/rer
MacKissic
MacKissic's Merry Commercial chipper-shredder model 12PHT with a 34-inch wheelbase is designed for easy towing. The tool steel knife mounted on the balanced flywheel combine for a total rotor weight of 40 pounds. The unit chews up to 3-inch limbs at a rate of 10 feet or more per minute. Twenty-four free-swinging reversible hammers turn lawn-and-garden debris into mulch and compost. Four-position baffle discharge and centrifugal clutch for no-load starting are designed to enhance machine user-friendliness. MacKissic offers a choice of the Briggs & Stratton 13.5 GT OHV or Honda GX240 commercial engine.
Reader Service No. 152 • freeproductinfo.net/rer
Vermeer
The BC600XL disc-style chipper is capable of processing material up to six inches in diameter, the maker says. The unit is powered by a 27-hp Kohler Command gas engine, an 8-percent increase in horsepower from its predecessor model. The unit features a 64-inch feed table and Bottom Feed Stop Bar, designed for the operator's leg to strike the bar and stop the feed. The auto-feed system automatically monitors engine RPM and controls the feed roller to maximize efficiency while reducing engine stress, supporting ease of operation and reducing material jams.
Reader Service No. 153 • freeproductinfo.net/rer
Bandit
Bandit's 1590XP hand-fed drum-style chipper can be optioned with wider horizontal feed wheels, measuring 25 inches versus the standard 20-inch-wide wheels. The new option allows the 1590XP to more aggressively crush limbs, reducing the amount of trim work required on larger material entering the chipper. The unit now offers engines up to 180 hp. The 1590's throat opening of 19.75 by 20.5 inches delivers production more in line with larger units.
Reader Service No. 154 • freeproductinfo.net/rer
Toro
The BC-25 brush chipper is engineered with a gravity-feed system that includes a 23- by 20-inch feed opening, 6-inch capacity and two single-edge cutter blades. The Kohler Command Pro CH25 V-Twin engine with heavy-duty centrifugal clutch powers the 1,000-pound BC-25. For ongoing production, the BC-25 is designed with a patent-pending mulching block to prevent jams and patent-pending replaceable cutter block, which allows operators to maintain close tolerance to the cutter blade.
Reader Service No. 155 • freeproductinfo.net/rer
