The D37EX-22 and D37PX-22 crawler dozers from Komatsu are designed for work in general construction, site preparation, home building, forestry and utility applications. Equipped with a fuel-efficient 3.26-liter, EPA Tier-3-emissions-certified Komatsu engine, these models offer 89 net hp at 2,200 rpm and range in operating weight from 17,394 to 19,070 pounds. Both standard (EX) and low-ground pressure (PX) models offer 88 inches of track for improved weight distribution and flotation options on the jobsite.
Reader Service No. 144 • freeproductinfo.net/rer
Iowa Mold Tooling Co. adds the 5005i crane to its line-up of electric telescopic cranes. The 5005i has a lifting capacity of 5,000 pounds and a maximum horizontal reach of 16 to 20 feet, depending on options. It is designed for lighter lifting applications and has a maximum horizontal reach ranging from 7 to 22 feet, and capacity ranging from 2,000 to 6,000 pounds. All models are compatible with the IMT Dominator mechanics trucks and feature manual and power booms and rotations, as well as 12-volt DC power sources.
Reader Service No. 145 • freeproductinfo.net/rer
The Titan DT Steamer from Wagner Spray Tech Corp. produces a dual-tank system that heats a small, continual stream of water in a small tank, providing continuous steam in less than five minutes. The unit features a 1.5-gallon tank, a 16-foot electrical cord, a 16-foot plastic steam hose, and dual-tank technology for a quick start. It provides three hours of steam time, can cover large areas or small areas between trim and doors and comes with no metal parts that could get hot for additional safety.
Reader Service No. 146 • freeproductinfo.net/rer
Metabo's W8-115 Quick angle grinder features ‘cool flow’ technology with repositioned brushes for unrestricted airflow and a fan that pulls 35-percent more air through the tool to keep it running cooler during operation. The 4½-inch angle grinder features an 8-amp motor with 800 watts of power, 19.5 inch-pounds of torque and a no-load speed of 10,000 rpm. Weighing 6.2 pounds, this lightweight grinder features a secure racket grip and dual grip zones for comfortable and ergonomic handling.
Reader Service No. 147 • freeproductinfo.net/rer
Keytroller introduces the Vanguard hydraulic forklift scale designed to provide accuracy to within .2-percent of the rated load. The unit uses a hydraulic bypass manifold module, which is mounted behind the mast on the forklift's firewall. Hydraulic fluid (under pressure from the load) bypasses through the module where the pressure sensor reads about 150 pressure values in 5 seconds as the load slowly lowers about 20 inches. These pressure readings are averaged by the device and most of the pressure errors are removed or significantly reduced.
Reader Service No. 148 • freeproductinfo.net/rer
The full-featured RP25 Redi Power mobile diesel generator from Winco features 25kVA/20kW output with switchable voltage and an Isuzu 2.2-liter diesel engine powers the unit. The generator also features a digital controller with auto shutdowns and digital readouts, as well as an illuminated instruction panel, a receptacle package and shore power inlet. The unit comes equipped with a 14-gauge galvanneal sound-attenuated steel enclosure, a durable powder-coat paint finish, a 45-gallon fuel tank and a full fluid containment system with drains.
Reader Service No. 149 • freeproductinfo.net/rer
Kasi Infrared introduces the Pro Heat Minute Man system, which is an asphalt repair technology designed to blend new asphalt right in with the original, leaving no seam. With this technology, a two-person crew can perform a pavement restoration job in about 30 minutes, compared to traditional cut-and-fill methods that can take a five- to six-person crew up to two days, according to the manufacturer. Options for the system include an LED light, which flashes to indicate asphalt has been heated for the appropriate time to prevent burning.
Reader Service No. 150 • freeproductinfo.net/rer
