The Lull Model 1044C Series II telehandler features 80 inches of horizontal boom travel for accurate load placement, 10,000-pound maximum lift capacity, 54-foot maximum lift height and a 1,500-pound maximum lift capacity at maximum forward reach of 45 feet. Another key feature of the Model 1044C Series II includes a steel frame design that incorporates a patented twin-rail box construction for an overall stronger structure and increased load capacity. The unit is powered by a Tier-2-compliant John Deere diesel engine rated at 115 hp.
Reader Service No. 144 • freeproductinfo.net/rer
The UNIC self-propelled Mini-Crawler Crane from Baker Equipment features a total width of 24 inches, a maximum working radius of 28 feet and a maximum boom length of 29 feet. This gasoline-powered unit also features a radio remote control option, as well as six-position configurable outriggers. The compact size and maneuverability of this unit is designed for it to be used where fixed or mounted cranes cannot go.
Reader Service No. 145 • freeproductinfo.net/rer
The EZ Dumper tandem-axle tilt-deck trailer features dimensions of 6 feet, 9 inches wide and 18 feet long, with a 4-foot stationary deck and a 14-foot tilt deck. The trailer offers 10,000 pounds GVWR, eight D-rings, a 2-inch pressure-treated deck, and a powder-coated black finish. The trailer also features electric brakes on both axles, rubber-mounted LED lights and a five-year structural warranty.
Reader Service No. 146 • freeproductinfo.net/rer
Rain for Rent's 60-4 high-flow, high-efficiency media filter is designed for all types of general filtration applications for sediment removal. This unit filters 20 microns up to 1,964 gpm with an operating pressure up to 75 psi. Standard features include 12- or 110-volt operation, manual or fully automated backwash and a minimal space requirement because of the horizontal space-saving design.
Reader Service No. 147 • freeproductinfo.net/rer
The Stone Construction Equipment Stomper line includes three models of 4-cycle rammers: XH670, XH730 (pictured) and XH840. Each is powered by a 4-cycle Honda engine that meets EPA emission standards, features easy starting, and eliminates use of 2-cycle oil or pre-mixing of fuel. The engine design also allows the Stompers to be laid down in any direction for easy transport and facilitates starting when standing. The XH730 weighs 140 pounds and has an impact force of 3,100 pounds.
Reader Service No. 148 • freeproductinfo.net/rer
The X Body Cooler from Xtreme Body Cooler is body-cooling apparel that can be worn to promote comfort, health and safety when an individual is exposed to prolonged and excessively hot environments. It uses polycrylamide cross-linked polymer technology combined with active wear vests and half vests. PCLP's are non-toxic, hypoallergenic and completely inert plastics, which in certain compounds absorb liquids at a rate of 500:1.
Reader Service No. 149 • freeproductinfo.net/rer
Morbark brush rakes are designed with close-proximity bottom tines to allow the picking up and carrying of stumps, logs, brush and pallets. They are available with 11 or 13 tines and the rake allows dirt to shake out through the bottom tines. The unit takes less than five minutes to attach to a front-end wheel loader with two simple hydraulic hoses providing power to the top tines, according to the manufacturer.
Reader Service No. 150 • freeproductinfo.net/rer
The TEX 140PS pneumatic handheld breaker from Atlas Copco Construction Tools weighs 34 pounds and requires 53 cfm of air. It comes standard with a two-step trigger that allows the operator to fully control the chisel when starting a cut. The air inlet swivel rotates easily, even under full pressure. A wear-resistant polyurethane silencer on each breaker dampens the noise from compressed air pulsations, limiting the sound level to 104 dbA.
Reader Service No. 151 • freeproductinfo.net/rer
