Product Spotlight Focus on Fall Lawn and Garden Equipment, Saws, Demolition Tools, and Ground Heating and Thawing Equipment
Sep 23, 2013-
Honda Power Equipment FC600 mid-tine tiller
The FC600 mid-tine commercial-grade tiller is designed for commercial, rental and residential markets. The FC600 incorporates a one-touch transport wheel, simplified drag-bar operation and a single-piece reinforced handlebar. Other design elements include a multi-functional front guard, a heavier-duty fender, new tine axle seal guards and gear case, a strengthened engine mount and a commercial-grade fuel cap. The FC600 also features three-position handle adjustment, a clutch lever and reinforced engine bed and handlebar.
Reader Service No. 151 • freeproductinfo.net/rer
More -
Ryan Lawnaire V with EST commercial aerator
The Ryan Lawnaire V with EST is a commercial steerable aerator engineered to keep the tines in the ground for non-stop aeration through turns and contours. Intuitive to the operator, the EST’s outer tines rotate faster left or right as the operator steers, embracing the turn while maintaining deep core penetration. Each tine wheel assembly has a one-way clutch bearing.
Reader Service No. 149 • freeproductinfo.net/rer
More -
Worksaver ETG-26 dual-tine grapple rake
Worksaver offers the ETG-26 dual-tine grapple rake for use on 30 to 80-hp front loaders or skid steers with the universal attachment system. The ETG-26 features two upper grapples that are 20 inches wide, lower tines are spaced 10 inches apart, and overall width is 72 inches. The tine grapple is suited for piling, loading brush and handling other materials while leaving dirt behind. The upper grapple design provides clamping force to hold material securely, featuring greaseable pivot point for long service life and a shield plate to protect the hydraulic cylinders.
Reader Service No. 150 • freeproductinfo.net/rer
More -
John Deere ZTrak Flex Fuel mower
John Deere introduces a Flex Fuel model to its line of ZTrak mowers. The new Z925M Flex Fuel is compatible with ethanol blends up to E85, giving contractors a new alternative fuel option for their fleets. With a 24.6-hp electronic fuel-injected engine, the Z925M Flex Fuel can run on any blend of ethanol-mixed fuel up to E85, and it has a top speed of 10 mph. Offered in 54- and 60-inch widths, it comes equipped with a 7-Iron deck for maximum durability.
Reader Service No. 152 • freeproductinfo.net/rer
More -
Edgetite paver spikes
Whether creating a walkway or a patio, Edgetite Spikes are designed to make landscaping projects quicker and more efficient for paver edging. The spikes help solve separation problems that can occur when using regular spikes designed for paver edging. Edgetite spikes feature a patent-pending angled tip design. As an Edgetite spike is hammered into the compacted base, the angled tip deflects away from the installation, while the head pushes the edge restraint tightly against the brick. The angled final position of an installed Edgetite spike resists frost heave, while adding strength and longevity, the maker says.
Reader Service No. 153 • freeproductinfo.net/rer
More -
Little Beaver Big Beaver auger drill rig
The combination of Little Beaver’s Big Beaver Auger Drill Rig with the optional SSK-1 kit is designed for standard penetration soil sample testing. It easily lifts the 140-pound hammer to drive the sampler into the soil. Little Beaver also offers hand-sampling tools that can be used with its mechanical and hydraulic-powered earth drills for quick and easy environmental soil sampling. The SSK-1 kit includes an additional hydraulic valve, Cathead and tower kit with stabilizer legs that extend out in front of the drill for additional stability. The Big Beaver is portable and is designed for limited access with a width of 26 inches and a height of 80 inches.
Reader Service No. 154 • freeproductinfo.net/rer
More -
Parker Thatch-O-Matic power rake
Parker offers its Thatch-O-Matic power rakes with tine and flail reels to remove lightly compacted grass and leaf debris. With a 19-inch sweeping width and 6-hp 169-cc Subaru engine, the power rake can be used for dethatching and to prepare for re-seeding. Housed in heavy-duty, fully welded 12-gauge steel, the Thatch-O-Matic is suited for commercial and rental applications. An 11-position height of cut moves in 0.25-inch increments from 1 to 4 inches with a locking collar. For operator safety, the power rake has a manual-operated clutch lever and a handle with a vibration-absorbing comfort grip.
Reader Service No. 155 • freeproductinfo.net/rer
More -
Ariens Pro-24 brush cutter
The new Pro-24 brush cutter from Ariens is designed to clear dense vegetation, brush and tree saplings up to 1.5 inches in diameter. The brush cutter features an 11.5-hp, 344 cc Briggs & Stratton Intek Series engine. With a 24-inch cutting width, a 3.3-inch cutting height and a blade tip speed of 16,100 feet per minute, the brush cutter is suited for cutting overgrowth or heavy brush. Additional features include a 0.7 gallon fuel capacity and a ground speed of up to 4.7 mph.
Reader Service No. 156 • freeproductinfo.net/rer
More -
Vermeer SC30TX stump cutter
The SC30TX stump cutter features an electronic fuel injection gas engine that performs well during cold-weather starts, reducing occurrence of engine flooding over comparable carbureted gas engines, and two individually controlled tracks that provide a zero turning radius. The 27-hp Kohler EFI gas engine produces the necessary torque for challenging ground conditions and stubborn tree stumps. The 16-inch cutter wheel on the SC30TX is positioned in the center of the unit for easy alignment with the stump. Vermeer’s Yellow Jacket cutter system offers extended life of cutting teeth and easy maintenance. Each tooth provides two full wear cycles, while its universal design fits any position on the cutter wheel.
Reader Service No. 157 • freeproductinfo.net/rer
More -
Toro 20-inch slit seeder
The Toro 20-inch Slit Seeder offers a seeding width of 20 inches and handles like a self-propelled push mower. Operators can make a tight turn — even on hills and with one-handed operation. The 20-inch model cuts into the ground to deposit seed for better seed germination and healthier lawns. The variable-speed drive system operates up to 3 mph in forward and 2.2 mph in reverse.
Reader Service No. 158 • freeproductinfo.net/rer
More -
Billy Goat Force wheeled blowers
Billy Goat’s Force wheeled blowers are up to 30-percent lighter, and offer up to seven times the power of a backpack blower, the maker says. Force models feature rounded composite housings and 16-blade advanced fan technology. Optional features include wheels, ergonomic handle and patented Aim-n-Shoot airflow.
Reader Service No. 159 • freeproductinfo.net/rer
More -
TurfEx TS95 walk-behind drop spreader
TurfEx introduces the TS95 walk-behind drop spreader. Designed for use in small yards and other confined areas, the spreader distributes material in a controlled pattern to reduce waste and prevent material from being applied to unwanted areas. The TS95 features a corrosion-resistant polyethylene hopper with a 120-pound capacity. It is capable of spreading a variety of granular materials, including fertilizer, pesticide, herbicide and seed, in a 28-inch-wide pattern. The material flow rate is precisely controlled through an adjustable gate. Equipped with large pneumatic tires, the TS95 requires minimal effort to push over any terrain. A clean poly cover is also included as standard equipment to protect material in the hopper from moisture.
Reader Service No. 160 • freeproductinfo.net/rer
More -
CS Unitec pneumatic chain saws
CS Unitec offers a complete line of pneumatic chain saws for cutting wood and plastic, as well as for underwater and underground applications. Series 5 1026, 5 1027, 5 1028 (pictured) and 5 1029 air saws are designed with a chain brake to stop chain movement during kickback or repositioning of the saw during cutting — a unique safety feature required by many industries. These heavy-duty air chain saws feature two separate oil lubricating systems. One oiler provides lubrication to the saw chain. A separate oiler automatically lubricates the motor for long life, easy startup and low maintenance. Safer than gas or electric in hazardous atmospheres, these pneumatic saws are suitable for use in hot work areas and hazardous environments. The 4-hp motor consumes 92 cfm of air at 90 psi. Each series of saws is available with a cutting capacity of 15, 17, 21 or 25 inches. Standard equipment includes an armor-tipped guide bar and a super chisel saw chain 404 pitch.
Reader Service No. 161 • freeproductinfo.net/rer
More -
Husqvarna K 760 power cutter
The new K 760 power cutter features a new cylinder designed to increase its capacity. Because of the cylinder and an additional cooling fin, emissions have been reduced by 15 percent compared to the previous model. The machine will maintain optimal operating temperatures, making it less sensitive to environmental temperature changes. The digital ignition system facilitates better startability and a smoother engine when running. This leads to very low vibrations, which significantly reduce the strain on the user. The integration of the fast-idle lock-in choke is another improvement that now makes starting easier, the maker says.
Reader Service No. 162 • freeproductinfo.net/rer
More -
General Equipment CS8/GH random crack saw
Designed to follow random crack patterns in asphalt and concrete surfaces, General Equipment Co.’s CS8/GH random crack saw uses 8-inch-diameter, dry cut-type diamond blades to produce smooth-sided cuts for proper crack-filling procedures. Power is supplied by an 11-hp Honda engine equipped with a Cyclone-type air filter system for maximum protection against fine-grained dust contamination. An available propane engine conversion allows use in confined areas where gasoline exhaust fumes are not permissible. Maximum cutting width is ½ inch and maximum straight-line cutting depth is 1 ½ inches.
Reader Service No. 163 • freeproductinfo.net/rer
More -
DeWalt DWE575 circular saw
The redesigned 7 ¼-inch circular saw from DeWalt is designed for framers, concrete formers, general contractors and remodelers for applications ranging from framing walls to cutting plywood and siding exterior finishing. Weighing 8.8 pounds and measuring 7.2 inches in width, the DWE575 is one of the lightest circular saws in its class, the maker says. An integrated dust blower cleans the user’s line of sight before cutting. In addition, high-quality gears ensure that the DWE575 provides smooth cutting performance. The saw also features a 57-degree bevel capacity, with 22.5- and 45-degree detents, and a 2 9/16-inch depth of cut capacity.
Reader Service No. 164 • freeproductinfo.net/rer
More -
Makita Magnesium Hypoid saw
The Makita 7 ¼-inch Magnesium Hypoid Saw features highly durable magnesium components and a 15-amp Makita-built industrial motor with a hypoid gearing system that delivers 4,500 rpm for maximum power output. Precision-machined hypoid gears are maintenance free and deliver more constant power than worm-drive gears. The saw has a cutting capacity of 2 3/8 inch at 90 degrees with a maximum bevel capacity of 51.5 degrees and positive stops at 22.5, 45 and 51.5 degrees for quick back-and-forth changes.
Reader Service No. 165 • freeproductinfo.net/rer
More -
Hilti DSH 700 and DSH 900 hand-held gas saw
The new Hilti DSH 700 and DSH 900 hand-held gas saws are designed from the ground up to incorporate features and requirements that rental professionals asked for – such as high power for fast cutting speed and an easy-to-remember starting procedure with simple controls. The new gas saw models are suited for rental applications including cutting wet/dry concrete and asphalt for small repair projects, expansion joints and curbs, brick and concrete block, as well as cutting small floor or wall openings. Standard features include a cyclone filtration system and simple rope replacement for easy maintenance and maximum durability.
Reader Service No. 166 • freeproductinfo.net/rer
More -
EDCO 18-inch walk-behind saw
The EDCO 18-inch walk-behind saw features a belt system that allows the use of different size blades without changing any pulleys or belts. Avoiding this maintenance reduces turn-around times and quickly prepares the DS18 for rental. Because all belts remain the same, simply remove and then retighten the arbor shaft’s backing plate and corresponding hardware when changing the blade. Arbor wrenches are included. The DS18 is compatible with 12- to 18-inch diamond blades and has a maximum cutting depth of 6.75 inches.
Reader Service No. 167 • freeproductinfo.net/rer
More -
Wacker Neuson BTS 630 and BTS 635S cut-off saws
Wacker Neuson’s cut-off saws are designed for professional users looking for high performance output. The BTS 630 and BTS 635S saws feature an innovative air filter concept that extends service life and reduces downtime, the maker says. The BTS 630 weighs 24 pounds and has a 12-inch blade diameter with .08 inch arbor. The BTS 635S has a 14-inch blade diameter, 1-inch arbor, weighs 24.9 pounds and offers a soft-start option that includes a spring system that supports the starter mechanism and reduces the effort required to pull the starter rope. A three-stage air filter system includes a cyclonic filter, a foam, pre-filter and a paper filter designed to last longer than comparable filters and reduce maintenance, downtime and lifecycle costs.
Reader Service No. 168 • freeproductinfo.net/rer
More -
Chicago Pneumatic CP1260 and CP1290 handheld breakers
Chicago Pneumatic Construction Equipment is introducing two new handheld breakers, the CP 1260 and CP 1290. Similar to the previous CP 1230 and CP 1240 models, the new units feature ergonomically designed handles to reduce operator fatigue, a flatter profile for enhanced visibility, and new polyurethane front head springs to reduce wear and extend the life of the breaker and internal components. The 1260 delivers 1,300 blows per minute, while the 81-pound CP 1290, delivers 1,100 bpm. The 28-inch-long 1290 is the most powerful of the CP handheld line.
Reader Service No. 169 • freeproductinfo.net/rer
More -
Bobcat hydraulic breaker
Bobcat’s hydraulic breaker matches the hydraulic capacity of the carrier to the breaker, allowing consistent machine-to-breaker performance. Applications include controlled and precise demolition jobs, such as operating next to buildings and other tight spaces. The hydraulic breaker attachment is designed for use with compact loaders or excavators. The attachments come in 60- to 1,000-foot-pound impact energy classes and are also designed for interior and flatwork demolition and road repair.
Reader Service No. 170 • freeproductinfo.net/rer
More -
Allied Construction Products AR 70C hydraulic impact hammer
The Model AR 70C hydraulic impact hammer is a 640-pound hammer that mounts on a mini-excavator, backhoe loader or skid-steer loader. The hammer features steady blow energy for maximum breaking power, straight hydraulic hose fittings for leak-free connections, slip-fit tool bushings to facilitate removal, conversion brackets to change from loader/backhoes to skid-steers in minutes, and supply pressure dampening for internal protection and smoother operation.
Reader Service No. 171 • freeproductinfo.net/rer
More -
Doosan DXB100H hydraulic breaker
The DXB100H hydraulic breaker from Doosan features an energy recovery system designed to increase strike power for maximum productivity in utility applications. Delivery up to 750 bpm, the 2,061-pound unit is designed for use with excavators in the 10-to-15-metric-ton weight range. Rated in the 2,000-foot-pound impact energy class, the DXB100 H requires a hydraulic flow rate of between 18.5 and 31.7 gallons per minute.
Reader Service No. 172 • freeproductinfo.net/rer
More -
Atlas Copco bucket crushers
Atlas Copco has added a line of bucket crushers to its demolition tool range of hydraulic attachments. Rig-mounted bucket crushers recycle asphalt, stone and concrete debris as well as mine, quarry and trench material. The output size adjusts from 0.5 to 4.75 inches or from 0.5 to 4 inches in the BC 1500 (pictured). The top and bottom jaws can be replaced or single jaws can be rotated by 180 degrees to provide for more even wear and longer service life. With only two grease points, maintenance is minimal.
Reader Service No. 173 • freeproductinfo.net/rer
More -
Wacker Neuson Climate Technology E1100 hydronic surface heater
Wacker Neuson Climate Technology introduces the E1100 hydronic surface heater with a genset delivering 3kW net output for off-grid use. The heater’s air-cooled diesel engine features an oversized Mecc-Alte generator head, and the on-board load-management system is designed to prevent wet stacking during low-load operation. Designed to deliver ground thawing, concrete curing, frost prevention and air heating, the heater features an external oil drain port and simplified access to air, fuel and oil filters. Rated to operate in temperatures of -40F, the E1100 can thaw up to 2,200 square feet of frozen ground with 1,100 feet of hose and up to 3,300 square feet with accessories. The unit has a 72-gallon fuel tank capacity.
Reader Service No. 174 • freeproductinfo.net/rer
More -
Thawzall H150 and H250 SL Series portable hydronic heaters
Thawzall introduces its new H150 and H250 (pictured) SL Series portable hydronic heating equipment with Heatzone concrete curing technology. Thawzall uses a proprietary process to evenly distribute heat to thaw frozen ground and cure concrete in freezing climates. Heatzone technology is designed specifically for the purpose of curing concrete, using fingertip control of temperatures for either curing or thawing. The onboard furnace of the Heatzone design maximizes efficiency and minimizes carbon impact on the environment.
Reader Service No. 175 • freeproductinfo.net/rer
More -
Powerblanket Multi-Duty heating blanket
The Powerblanket Multi-Duty heating blanket is designed to be an environmentally friendly method for curing concrete, thawing frozen ground and protecting construction materials and machinery from freezing. Featuring patented GreenHeat technology, the blanket uniformly distributes an insulated barrier of heat while consuming low levels of energy. The blankets are offered in several sizes ranging from 2-by-2 feet to 11-by-23 feet and can be customized. Standard blankets are rated to -10F/-23C, with Arctic versions rated to perform in temperatures as low as -40F/-40C. Built with a winter-proof, water-resistant outer shell, the blankets are powered by 120V electricity.
Reader Service No. 176 • freeproductinfo.net/rer
More -
Terex PT-75 compact track loader
Featuring a 4-cylinder, turbocharged Perkins 304C-33T diesel engine, the new 71-hp Terex PT-75 compact track loader is the newest member of the Terex line of Tier 4 interim compliant compact construction equipment. The loader is 70 inches wide, allowing it to maneuver in confined or congested work sites. The new PT-75 has 178.5 foot-pounds of peak torque, a tipping load of 6,200 pounds — with a 3,100-pound operating capacity at 50-percent tipping load capacity — and a lift height of 125 inches.
Reader Service No. 141 • freeproductinfo.net/rer
More -
Schaefer Ventilation Equipment three-in-one package
Schaefer Ventilation Equipment offers a new three-in-one package designed for the rental industry that features a quick-release tripod pedestal with interchangeable heater head, fan head and misting system. The unit features 24-inch fan head, low-pressure mist ring and 1,500-watt electric heater with heavy-duty 5-pound pedestal. It is also available as a fan or heater only.
Reader Service No. 142 • freeproductinfo.net/rer
More -
Larson Electronics WCDE-4-4X300W-LED mobile light tower
The WCDE-4-4X300W-LED mobile light tower from Larson Electronics is a full-size industrial-grade lighting system that provides operators with the ability to illuminate a 6-acre work area for 60 hours on a single tank of fuel. The unit is powered by a Kubota water-cooled diesel engine turning a 6,000-watt, 120/240 VAC generator with four wire hookup and external ground.
Reader Service No. 143 • freeproductinfo.net/rer
More -
Minnich Manufacturing wireless remote technology
Minnich Manufacturing introduces patent-pending wireless remote control technology to increase efficiency and safety for concrete dowel-pin drilling applications. The technology improves conditions on the jobsite by allowing the drill operator to have an improved vantage point for more accurate operation. By removing the operator from the drilling unit, the wireless remote control allows workers to avoid harmful dust and debris.
Reader Service No. 144 • freeproductinfo.net/rer
More -
Bosch Power Tools PSJ120 heated jacket
Bosch Power Tools launches the company’s first 12-volt max heated jacket and battery holster/controller USB power backup. The PSJ120 heated jacket is designed to keep outdoor contractors and mobile technicians warm and protected from the elements, while also offering a convenient built-in battery backup power source — the BHB120 — to keep USB-compatible cell phones and other important electronics charged. The jacket features three quick warming core heat zones — two chest and one back — that start warming in minutes and provide up to 6 hours of heated runtime on low heat level with a 2.0 Ah battery.
Reader Service No. 145 • freeproductinfo.net/rer
More -
Diversified Fall Protection Transportable fall protection system
Diversified Fall Protection introduces its Trans-Portable Fall Protection Systems, designed for applications requiring a mobile solution due to location, lack of overhead structure for permanent system mounting, or the need for multiple location use throughout a facility. The systems feature solutions that support both active and passive fall protection equipment such as ladder access systems, work platforms, mobile access solutions and fixed ladders. TFP will serve a variety of industries including aviation, transportation, oil and gas, utilities, wind energy and construction.
Reader Service No. 146 • freeproductinfo.net/rer
More -
Griffin Pump & Equipment PolyTank
Griffin Pump & Equipment offers its PolyTank polypropylene and polyethylene tanks in sizes up to 50,000-gallon capacities. The tanks are engineered to be structurally strong and dimensionally stable. They are available for applications including the chemical and oil industries, agriculture, water treatment, pharmaceuticals, steel, petroleum and municipalities.
Reader Service No. 147 • freeproductinfo.net/rer
More -
Related Galleries / Refresh Gallery
This month RER focuses on fall lawn and garden equipment, saws, demolition tools, and ground heating and thawing equipment from manufacturers including Honda Power Equipment, John Deere, Billy Goat, General Equipment, Husqvarna, Doosan, Wacker Neuson and more.
