The WEDA04 drainage pump is equipped with a 400-watt electric motor, while the WEDA08 features a 750-watt electric motor. The polyurethane semi-vortex impeller reduces the risk of clogging, making it suitable for construction sites or industrial pits. The Atlas Copco WEDA04B residual pump has the ability to pump down to 1 millimeter of water. The WEDA08S sludge pump is specifically designed for difficult sand and mud applications. Particles and debris up to 25 millimeters can go through the pump housing with minimal wear.
Reader Service No. 157 • freeproductinfo.net/rer
The 6HT provides flow rates up to 1,430 gpm, heads to 104 feet and can handle solids up to 3 feet. Its heavy-duty cast-iron construction gives it the ability to self-prime and re-prime automatically. It provides a low-cost maintenance and fuel efficiency.
Reader Service No. 158 • freeproductinfo.net/rer
Tsurumi’s model HS2.4S-62 is specially designed to handle aggressive dirty water pumping projects. It is designed to pump sand, solids and debris with minimal wear and clogging. Features include: Built-in shaft-mounted agitator to suspend solids; Urethane rubber semi-vortex impeller for greater wear resistance; Maximum performance of 50 gallons per minute.
Reader Service No. 159 • freeproductinfo.net/rer
The WT series pumps from Honda Power Equipment offer the easy-starting and reliable OHV commercial-grade engine, rugged full frame protection, quick release clean-out and durable Silicon carbide mechanical seals. The WT trash pumps also include a unique conical-shaped cast iron impeller for improved priming and durability, replaceable stainless-steel wear plates for extended life, long-life silicon carbide water seals, lightweight cast aluminum pump housing, high performance mounts which minimize vibration and a convenient multi-tool for on-site pump servicing and clean-out.
Reader Service No. 160 • freeproductinfo.net/rer
Subaru Trash Pumps combine a powerful engine, heavy-duty construction and reliable performance to move high volumes of trash water without clogging the pump. The 2-inch PKX201T is powered by the EX17, a 5.7-horsepower overhead cam engine, and offers a delivery volume of 185 gallons per minute. The 3-inch PKX301T is powered by the EX27, a 9.0-horsepower overhead cam engine, and offers a delivery volume of 314 gallons per minute. The 4-inch PKX401T is powered by the EX40, a 14-horsepower overhead cam engine, and offers a delivery volume of 499 gallons per minute.
Reader Service No. 161 • freeproductinfo.net/rer
Hilti’s PR 30-HVS rotating laser is designed to be drop-resistant from standard working heights with an internal damping system, shock-absorbing casing and four shock-absorbing handles. The unit has improved keypads and an integrated remote/laser receiver to enhance productivity. The optional PRA 90 automatic tripod can be controlled with the same remote/laser receiver to facilitate horizontal alignment. When repaired by Hilti, the PR 30-HVS is calibrated and adjusted as needed, with calibration confirmed in writing for professional assurance.
Reader Service No. 162 • freeproductinfo.net/rer
The DCN692 framing nailer from DeWalt provides a gas-free option to eliminate the need for gas canisters. The unit is designed for cold weather usage. With dual-speed settings optimized for different nail lengths, nailer users can select setting No. 1 for shorter nails with lower vibration and increased shots per charge and increased application speed or setting No. 2 for longer nails with increased speed and power. The unit combines brushless motor technology with a lithium ion battery pack that allows driving up to 700 nails per charge.
Reader Service No. 163 • freeproductinfo.net/rer
The Makita EK7651H is the world’s first 4-stroke engine power cutter, according to the manufacturer. The MM4 engine requires no 2-stroke oil, which is designed to prevent piston seizure caused by improper mixing. The unit features an automatic engine decompression valve, engineered into the cam gear to reduce pull start force by 40 percent. The pressure-compensated carburetor with vented choke plate adjusts automatically to prevent flooding. An integrated aluminum wheel kit retracts when not in use to prevent unexpected movement at idle.
Reader Service No. 164 • freeproductinfo.net/rer
The DM 650 electric drill motor from Husqvarna can be operated on both 3- and 1-phase power, delivering 8 hp (6kW) on the spindle on 3-phase and 4 hp (3 kW) on 1-phase. The unit is lightweight at 31 pounds. With a torque boost, speed is reduced to increase drilling torque when encountering steel-reinforced substrates. The DM 650 is designed for core drilling from 4 to 24 inches in diameter. The 18-step adjustable rpm range ensures optimal speed for all drill bit dimensions.
Reader Service No. 165 • freeproductinfo.net/rer
Bosch is introducing its new 1 9/16-inch rotary hammers with 6.1 foot-pounds of impact energy, the RH540M SDS-maxA rotary hammer and RH540S spline rotary hammers deliver 38 percent more impact energy than previous Bosch models. A variable speed dial, for both drilling and chiseling applications, allows users to adjust tool settings based on the application and material, and a selector now facilitates switching between hammer drilling, chiseling only and the Vario-lock function.
Reader Service No. 166 • freeproductinfo.net/rer
This month RER focuses on pumps and power tools from manufacturers including Atlas Copco, Subaru, DeWalt, Makita, Husqvarna and more.
The RER Industry Directory is the resource buyers like yourself rely on when looking for up-to-date information on the products or services you are searching for.
Sponsored Introduction Continue on to (or wait seconds) ×