-
Atlas Copco SMART Concrete Pokers
Atlas Copco debuts a three-model family of electronic SMART concrete pokers. The third generation redesign of the model 40, 48 and 56 SMART pokers has a streamlined aluminum housing that protects their built-in electronics with an overall weight reduction of 30 percent. Powered by a common 120-volt supply, Atlas Copco says the pokers feature plug-and-poke operation and the simplicity of a single on/off switch control. High centrifugal force, ranging from 360 pounds in the SMART 40 to more than 1,030 pounds in the SMART 56 combines with stable speed and high amplitude to ensure good concrete vibration with fewer dips. The SMART poker comes with 32.8 feet of cable and 16.4 feet of hose to provide ample reach at the jobsite.
Reader Service No. 180 • freeproductinfo.net/rer
-
Super Bright LEDs
Super Bright LEDs introduces its newest line of high-powered LED light bars and auxiliary lights. Designed for on- and off-road vehicle use, each waterproof light produces high light output with a low power draw, and has an operation lifetime of up to 50,000 hours. Each light is composed of a lightweight, durable aluminum housing with a durable polycarbonate lens to protect against scratches, rocks and debris damage. Light intensities span from 300 to 5,400 lumens.
Reader Service No. 181 • freeproductinfo.net/rer
-
Genie GR-26J Runabout
The new Genie GR-26J Runabout self-propelled vertical mast with jib is the latest in the Genie vertical lift family of products and is suited for locations where outreach is required in a confined space. The Runabout provides users with a wide range of motion for accomplishing jobsite applications ranging from warehousing to maintenance. The unit offers up-and-over maximum clearance of 21 feet, 10.5 inches, a maximum working height of 31 feet, 9 inches and a maximum working horizontal reach of 10 feet, 1 inch. A 140-degree jib range of motion and 350-degree non-continuous hydraulic turntable rotation enables the unit to deliver precise positioning of loads. An electric-drive motor ensures smooth operation at high and low speeds and is environmentally friendly.
Reader Service No. 182 • freeproductinfo.net/rer
-
Clarke Clean Track L24
Clarke introduces the Clean Track L24, the newest battery-powered, walk-behind model in the company’s Clean Track family of carpet extractors. Featuring LIFT technology, the Clean Track L24 achieves carpet dry times of 30 minutes or less, according to the manufacturer. Its low 69 dBA noise levels make it suitable for daytime cleaning in noise-sensitive areas such as education, healthcare and hospitality facilities. Onboard detergent dispensing minimizes the use of detergent and water while allowing users the flexibility to use any brand of greencertified detergent, eliminating the need to purchase a proprietary chemical.
Reader Service No. 183 • freeproductinfo.net/rer
-
MSA CO/NO2 XCell Sensor
MSA announces the CO/NO2 XCell Sensor for Altair 4X multigas detectors, designed for monitoring diesel emissions of carbon monoxide and nitrogen dioxide. The new CO/NO2 XCell Sensor provides a range of 0-2000 ppm CO and 0-50 ppm NO2, 1 ppm and 0.1 ppm resolution respectively. The sensor’s fast response time allows users to bump test in less than 10 seconds and perform full-span calibration in 60 seconds.
Reader Service No. 184 • freeproductinfo.net/rer
-
Bailey Cranes IC-18 Mobile Crane
A new battery-powered hybrid carry-deck crane from Bailey Cranes produces no carbon monoxide and is available with a hybrid option that allows the user to switch from battery power to low-emission propane. The IC-18 mobile crane has an 18,000-pound capacity.
Reader Service No. 185 • freeproductinfo.net/rer
-
TurfEx RS7200 Spread- N-Spray
TurfEx offers its first self-propelled spreader/sprayer combination unit. The RS7200 Spread- N-Spray is powered by a 200-cc Honda GX200 engine, with a 2:1 ratio gear reducer. The Spread-N-Spray’s heavy-duty transmission includes two forward gears, plus neutral and reverse. The unit comes with a hand-operated transmission disc brake as well as a footcontrolled sulky band brake. The large-capacity hopper accommodates 150 pounds or 3 cubic feet of material, which can be spread up to 11 feet wide. The balanced tank system holds 17 gallons of liquid and contains just one fill port for quick, convenient refilling. The sprayer is powered by a 2-gpm pump and the low-pressure nozzles offer multiple spray patterns to apply liquid up to 11 feet wide.
Reader Service No. 186 • freeproductinfo.net/rer
-
Bobcat Asphalt Preservation Tools System
Bobcat Co. launches the Bobcat Asphalt Preservation Tools system, designed to provide asphalt paving contractors and government customers with a system powered by Bobcat loaders for cost-effective repairs that minimizes traffic disruption. This simple restoration system is engineered to be beneficial to asphalt paving contractors and municipal road repair crews for repairing potholes and other surface defects such as cracks, deteriorating surfaces, and frost heaves that develop in streets, highways and parking lots. The system also is suitable for reclamation of driveways, trails and golf cart paths. These attachments are designed to perform a three-step asphalt preservation process that fuses recycled asphalt with surrounding asphalt to create a strong and durable bond that outlasts conventional asphalt approaches because it does not involve cold joints or repeated treatments. The tools answer a growing need for eco-friendly restoration processes that will decrease expenses and extend the life of road and highway repairs, the maker says. The system consists of an infrared asphalt heater and an asphalt processor that is compatible with 12 approved Bobcat all-wheel steer loaders, skid-steer loaders and track loaders.
Reader Service No. 187 • freeproductinfo.net/rer
-
Chicago Pneumatic CP7769 Series
Chicago Pneumatic offers the CP7769 Series ¾-inch air impact wrench with side-to-side single-hand forward/ reverse switching for improved efficiency and operator comfort. The CP7769 Series is designed for a wide variety of maintenance applications, including heavy vehicle mechanical repair and maintenance repair operations. The CP7769 and the CP7769-6 with 6-inch extension shank provide 1,440 foot-pounds of maximum torque. The S2S single-hand forward/reverse switch allows the operator to change between forward and reverse with one hand, even in tight places.
Reader Service No. 150 • freeproductinfo.net/rer
-
General Equipment Co.’s MDF Series
General Equipment Co.’s MDF Series of Long Reach Air Tools is designed for a wide variety of removal and surface preparation applications. The tools feature ergonomic throttle valves and protective enclosures to maximize operator comfort and reduce the risk of equipment damage. Weighing 10 pounds, the MDF15 is designed for above-waist and overhead projects. The unit produces 3,700 bpm while requiring a flow rate of 6 cfm at 90 psi. For heavier duty jobs the MDF35 utilizes an internal valving mechanism, which makes the piston deliver a more powerful blow. This model requires a flow rate of 11 cfm at 90 psi, and produces 3,100 bpm.
Reader Service No. 151 • freeproductinfo.net/rer
-
Sullivan-Palatek Construction Tool Line
Sullivan-Palatek’s construction tool line fits varying applications in the rental industry, from detailed light concrete demolition to bridge deck repair and blast hole drilling. The company offers pneumatic demolition tools weighing from 15 to 90 pounds; sinker drills from the 20- to 60-pound class; rivet busters; tampers; and all related hoses, oilers and accessories.
Reader Service No. 152 • freeproductinfo.net/rer
-
Doosan Portable Power Dual-Pressure Mid-Range Air Compressors
Doosan Portable Power introduces three new models of dual-pressure mid-range air compressors — P425/HP375WCU, HP450/VHP400WCU and P600/XP535WCU. They are suited for use in a variety of applications, including general construction, abrasive blasting and pneumatic tool applications. The two-in-one dual-pressure units deliver airflow ranging from 375 to 600 cfm and pressures ranging from 100 to 200 psi, depending on the model. All three models are powered by Cummins QSB Tier 4i-compliant engines. One of the newly redesigned components on these models is the Mid-Port full-gauge control panel. Standard on the panel is a tachometer display that allows the operator to see selected engine and airend temperatures, pressure, as well as percentage of fan speed and engine load. The operator can set service intervals, languages and display features for an improved operator interface.
Reader Service No. 153 • freeproductinfo.net/rer
-
Kaeser Mobilair M27 Portable Compressor
Kaeser introduces the new Mobilair M27 portable compressor, which provides 92 cfm at 100 psig. The M27 features a larger, slower-turning airend to produce 15- to 20-percent more air per gallon of fuel than its competitors, the maker says. Its 3-cylinder 21-hp Kubota diesel engine complies with Tier 4 emissions standards. The M27’s roto-molded polymer canopy is scratch and dent resistant, and its heavy-duty chassis offers further protection from the elements and corrosion. The M27 also has an anti-frost valve that that helps maintain optimum operating temperature. It features a convenient tool box for storage, and is available as a skid-mounted utility model for cross mounting on service vehicles.
Reader Service No. 154 • freeproductinfo.net/rer
-
EDCO Chisel Scalers
Using rapid hammering action and multiple accessories, EDCO chisel scalers quickly remove tile, grout, fiberglass, roofing shingles, linoleum and other coverings. The chisel scalers are designed to eliminate the need for working on hands and knees when floor stripping. In addition, the tools are productive, easy-to-operate and safe. To maintain the tool, simply lubricate the unit before every rental and monitor the air-sealing rings..
Reader Service No. 155 • freeproductinfo.net/rer
-
MMD Equipment PDS185S-6C2 Portable Airman Compressor
The PDS185S-6C2 portable Airman compressor is equipped with a Yanmar 49-hp engine and is interim Tier- 4 and CARB compliant. The engine idles as low as 1,300 rpm to increase fuel efficiency and reduce component wear. Features include lowfuel shut down, an easy-to-read fuel gauge and an analog air-pressure gauge. Dual air cleaners provide better dust protection for the air end.
Reader Service No. 156 • freeproductinfo.net/rer
-
Sullair 375H AF Portable Air Compressor
The Sullair 375H AF portable air compressor is designed to provide the dry, clean air necessary for media blasting and painting, or protective coating applications. Available with a choice of either Caterpillar or John Deere 4-cylinder diesel engines, both of which are Tier- 3 emission compliant, the Sullair 375H AF delivers 375 cfm at 150 psig. The unit includes a high-capacity, low-approach aftercooler; moisture separator with water/condensate trap; and a high-efficiency contaminantremoval system.
Reader Service No. 157 • freeproductinfo.net/rer
-
Bradco Trencher Line by Paladin Attachment
The Bradco trencher line by Paladin Attachments is designed to complement compact and standard skid-steer loaders or tractors. Cutting depths are available from 24 to 60 inches and cutting widths range from 3 to 12 inches. Both standard and high-flow models are available. The Bradco trencher line provides several tooth options including cup, shark, and rock and frost teeth. A discharging auger neatly places dirt away from the trench to eliminate refilling. Each trencher model utilizes a fixed-length boom with a spring-loaded, self-adjusting idler and full rock guard to provide added durability and safety during trenching.
Reader Service No. 170 • freeproductinfo.net/rer
-
Barreto Manufacturing TK Track Trencher Series
The TK Track Trencher series from Barreto Manufacturing features tracks that are less invasive on the landscape. Each track provides 241 square inches of ground contact. Cross-trenching is made simple and by combining tracks with additional weight, the Barreto TK will reduce the impact of hard soil conditions. Available engine options range from 13 to 30 hp with digging depths of 24 to 48 inches.
Reader Service No. 171 • freeproductinfo.net/rer
-
Little Beaver KT200B & KT2400B Kwik-Trench Mini-Trenchers
Offered in two models, the KT200B and KT2400B Kwik-Trench mini-trenchers from Little Beaver are both able to trench up to 30 feet per minute. Featuring durable construction and a compact design, the Kwik-Trench is suited for landscape edging and root-pruning projects as well as installations of plumbing and drainage lines, low-voltage wiring, silt fences and sprinkler systems. Featuring carbide-tipped teeth and a powerful drive system, the mini-trencher is able to cut through tough surfaces such as compacted clay, road fill, asphalt and tree roots up to 10 inches thick. Powered by a 5.5-hp Honda engine, the KT200B is capable of achieving depths up to 8 inches. The KT2400B features an 8-hp Honda engine and achieves depths to 12 inches.
Reader Service No. 172 • freeproductinfo.net/rer
-
Toro Pro Sneak 360-degree Vibratory Plow
Toro introduces the Pro Sneak 360-degree vibratory plow, designed for utility and irrigation work. Features include a small, 36-inch footprint; an optimized operator position that ensures safety and provides maximum visibility of the jobsite and all four tires; and consistent plowing up to 24 inches deep, maintained by positive hydraulic down pressure, regardless of the terrain. The Pro Sneak 360 also features 10-degree frame oscillation to ensure constant wheel-to-ground contact when plowing in problematic conditions. It also features an optional front-mounted trencher that delivers a dig depth of 36 inches. It is powered by a Caterpillar C1.6 four-cylinder liquid-cooled diesel engine.
Reader Service No. 173 • freeproductinfo.net/rer
-
Vermeer RTX250 Pedestrian Trencher
The new RTX250 pedestrian trencher is a rubber-tracked, steerable machine designed for rental businesses and utility contractors. The RTX250 uses a 27-hp Kohler electronic fuel-injected gas engine that delivers more power over competitive models to dig 8-inch-wide trenches up to 48 inches deep. Easy to operate, it features a two-handlebar VZ steering system that allows easy mobility and operation without the need for numerous joysticks or significant operator training. A dedicated platform means additional counterweights are not necessary in order for the unit to trench properly and maintain proper balance. The dedicated rubber track system is designed to minimize ground pressure.
Reader Service No. 174 • freeproductinfo.net/rer
-
Turf Teq 1305SP1 Walk-Behind Trencher
The self-propelled Turf Teq 1305SP1 is a walk-behind trencher that can trench up to 7 inches deep. Several blade options are offered, from ½-inch wide to 7 inches deep; 2 ½ inches wide to 7 inches deep; and 5 inches wide by 5 inches deep. The unit features a 13-hp Honda engine and a hydrostatic forward/reverse transmission. The trencher also has multi-use capability as a landscape power edger, power broom, power rake, brush cutter and plow.
Reader Service No. 175 • freeproductinfo.net/rer
-
Bobcat LT414 Trencher Attachment
The LT414 trencher attachment from Bobcat is engineered to cut into the ground and build a trench through all soil conditions, including tough, rocky soil types. The operator can use the side-shift feature — manual or hydraulic depending on model — to dig a trench close to buildings, fences and other objects, or equip the trencher with different teeth and chain options to maximize trenching capabilities in different soil conditions. The LT414 delivers a 4- to 5-foot dig depth and provides the option of high-flow performance capabilities.
Reader Service No. 176 • freeproductinfo.net/rer
-
Ground Hog T-4 Trencher
The Ground Hog T-4 trencher is a small, operator-propelled chain-type trencher designed for jobs requiring up to a 12- or 18-inch-deep trench. Heavy-gauge powder-coated steel is used throughout the T-4’s construction as well as tapered roller bearings and double-row ball bearings to ensure trouble-free service, the maker says. Simplified operator controls are designed to make the T-4 trencher less intimidating to unfamiliar operators.
Reader Service No. 177 • freeproductinfo.net/rer
-
EZ-Trench Groundsaw EZ9100
The Groundsaw EZ9100 can dig a 13-inch-deep and 2 ½-inch-wide trench at a rate of 20 feet per minute. It is small enough to fit into standard gates and weighs 250 pounds. The model EZ9100 has a 6.5-hp Honda engine with a wet-clutch transmission, which is engineered to virtually eliminate the frequent maintenance associated with belt-driven equipment. Heavy-duty replaceable carbide cutting bits are designed to slice right through hard soils and roots.
Reader Service No. 178 • freeproductinfo.net/rer
-
Ditch Witch Compact Walk-Behind Trenchers
The Charles Machine Works, manufacturer of Ditch Witch underground construction equipment, offers a new line of compact, powerful walk-behind trenchers — the RT12, RT16, RT20 and RT24. Each model was designed and manufactured to provide a good return on investment for small business owners, particularly equipment rental companies. The new models feature a hydraulic system, as opposed to belt-driven. The entire line of Ditch Witch walk-behind trenchers incorporates a stacked, in-line hydraulic pump configuration that effectively eliminates vertical shafts and the use of belts and/or flywheel reduction systems, and ultimately reduces downtime. Ditch Witch offers a choice of high-flotation tires or a heavy-duty DuraTrak track system on the new RT Series, which is designed to provide traction and stability over rough and uneven terrain.
Reader Service No. 179 • freeproductinfo.net/rer
