CS Unitec’s pneumatic concrete chain saw with an AirFORCE F4 Diamond Chain is designed for cutting reinforced concrete, brick, block, concrete pipe and natural stone. The CS 536163-3 air saw plunge cuts up to 20 inches deep in one pass and quickly cuts mechanical openings, irregular shapes and square corners up to 19 inches with no overcuts. Its 6.5 HP air motor has a no load speed of 5,700 RPM. The saw can be used hand-held or with the optional SpeedHook guide to make straight cuts through walls and other surfaces. This saw operates at 124 CFM air volume at 90 PSI air pressure (6 bar). Noise level is 88 dB at 3 feet.
Despite its powerful motor, the EDCO 16-inch hand-held saw plugs into a regular 20AMP outlet. Electric operation eliminates the need for hydraulic hoses and fluids, exhaust fumes and gasoline. Comes equipped with EDCO’s exclusive “Smart Electronic Protection System” featuring a soft start motor, designed to ensure a smooth and safe start; a mechanical clutch that protects the operator in the event of a jam; and an electronic clutch that protects the operator in case of overload. The EDCO 16-inch saw is designed for cutting concrete, masonry, asphalt and natural stone; creating window and door openings; and metal cutting (with abrasive blade and large flange).
General Equipment Company’s CS8 Random Crack Saw is designed for following and cutting irregular crack patterns in both asphalt and concrete surfaces. Utilizing an 8-inch diameter, dry-cut diamond blade, the saw features a center-mounted blade for maneuverability. Power is supplied by a 13-horsepower Honda GXV390, 4-stroke engine equipped with a Cyclone-type air filter system for maximum protection against fine-grained dust contamination. The maximum cutting width is 1/2 inch and the maximum straight-line cutting depth is 1-1/2 inches. Other standard features include an infinitely adjustable blade-height control and the Quik-Pitch blade engage/disengage lever. An integrated dustpan helps collect the high volume of fines produced during sawing and discards them away from the operator. An optional water mist control system is available for wet-cutting applications.
The new Hilti DSH 700 and DSH 900 hand held gas saws include features specifically aimed at the rental market. The saws are designed for cutting wet/dry concrete and asphalt for small repair projects, expansion joints and curbs, brick and concrete block, as well as cutting small floor or wall openings. They also cut metal deck, rebar, bolts, dowel bars, grating and other metals with abrasive blades. Isolated handles with metal springs are designed to minimize vibrations and maximize saw control. A simple counter-clockwise starting procedure and a primer bulb are designed to ease starts. A cyclone filtration system (no pre-filter) comes standard and simple rope replacement is offered for easy maintenance and maximum durability.
The improved K 970 power cutter is designed with an enhanced power-to-weight ratio and offers optimized performance combined with a low weight and superior ergonomics. The new cylinder design and carburetor are designed to increase capacity and optimize performance. The new cylinder and new muffler, with integrated heat deflector, ensure optimal operating temperatures and make the machine less sensitive to variations in climate and fuel. The new, lighter blade guard made of magnesium (only available on the 14-inch model; the 16-inch model has a steel guard) gives the power cutter better balance and provides stepless guard adjustment. The new blade guard includes a reversible blade bushing, easing blade changes. A progressive water valve allows exact adjustment of the water volume, designed to reduce water consumption and slurry.
The new ICS 701-A cutting system is powered by compressed air instead of hydraulic or gas power. This allows users to cut in areas with limited ventilation, such as at the bottom of a deep trench, where air circulation can be a challenge. The 701-A features a die-cast aluminum body with a modular motor design and three available guide bar lengths. It is compatible with ICS Powergrit Utility Chain or FORCE4 concrete-cutting diamond chains with SealPro technology. SealPro incorporates a patented chain chassis design that seals out the abrasive contaminants present in the concrete cutting environment. A unique o-ring design seals the rivet-joints of the chain, keeping the abrasive materials out and the lubrication in. Abrasion inside the chain chassis is the primary cause of chain wear and stretch in non-sealed chains.
The 14-inch MM4 4-Stroke Power Cutter from Makita is designed to offer contractors the convenience of a “one-can” same-fuel jobsite for power cutters and other gas-powered equipment. No fuel mixing offers simplified operation, prevents engine failure caused by improper mixing, and eliminates the expense of purchasing 2-stroke oil. The Makita 4-stroke is designed to offer several other advantages over 2-stroke including lower noise at 92.7 dB(A), smoother idle, lower fuel consumption, and automatic engine decompression for significantly easier starts, per the OEM. The Makita power cutter also includes an integrated wheel kit that comes standard.
Wacker Neuson’s BTS 630 and BTS 635S saws feature an innovative air filters and high torque engines and are designed to operate and start reliably. The BTS 630 weighs 24 pounds and has a 12-inch blade diameter with .08-inch arbor. The BTS 635S has a 14-inch blade diameter, one-inch arbor, weighs 24.9 pounds and offers a spring-driven soft start option. The saws’ three-stage filter system includes a cyclonic filter, a foam pre-filter and a paper filter. A special coating protects pistons and cylinders from accelerated wear. The pistons are also equipped with two piston rings. Other features designed to extend service life include a poly v-belt and enclosed starter rope housing. The high torque 5.8 horsepower engine combined with a vibration damping system cuts hand-arm vibration to less than 5 m/s2.
information usweful guy thank you
this is a nice chainsaw model, it looks very cool www.coachagustintorres.com
Pretty good post. Any way I'll be subscribing to your feed and I hope you post again soon. www.clazwork.com
This is one very good information for me, I will bookmark your website so I can follow continuously the content of your content.
thanks for sharing this information to us.
It's really interesting This is one very good information for me, I will bookmark your website so I can follow continuously the content of your content.
The RER Industry Directory is the resource buyers like yourself rely on when looking for up-to-date information on the products or services you are searching for.
Sponsored Introduction Continue on to (or wait seconds) ×