Blastrac's 1-9DEZ lightweight shot-blasting system is used to prepare concrete surfaces prior to the application of paint or coatings. The unit is designed for small jobs in tight areas and runs on 120-volt power to strip, clean and profile in one step. With a 9-inch blast pattern and a manual travel speed, the 1-9DEZ is designed to prepare up to 275 square feet per hour.
Circle 143 on Reply Card • freeproductinfo.net/rer
The Kenco Pipe Lift is designed for safe and simple handling of pipe ranging from 3-inch OD to 100-inch OD. The scissor action of the machine allows each model to lift a wide range of pipe sizes, and centering the lifter on the pipe is not necessary, the manufacturer says. The Pipe Lift doubles production of pipe installation versus methods using slings and cables. It eliminates the need for a laborer on the ground.
Circle 144 on Reply Card • freeproductinfo.net/rer
The 1 ⅛-inch Hilti hex connection polygon chisels are designed for use in both demolition hammers and stand-up breakers. Because they are self-sharpening, the polygon chisels make resharpening and rehardening unnecessary allowing customers to maintain a high level of performance throughout the chisel's life.
Circle 145 on Reply Card • freeproductinfo.net/rer
Volvo Construction Equipment introduces five models of pipelaying equipment. Lift capacities range from 20 metric tons to 150 metric tons. The Volvo Pipelayers provide a 360-degree swing with full lifting performance and functionality at all radius positions. Boom lengths range from 30 feet to 38 feet, depending on model size, compared to typical dozer side-based booms of 20 feet to 28 feet.
Circle 146 on Reply Card • freeproductinfo.net/rer
The Rocket 3600 from Diteq Diamond Tools & Equipment is designed to handle larger tiles and stone slabs commonly used in commercial and upper scale residential jobs. The Rocket's 24-inch square cutting cart has an extension that accommodates slabs up to 24 inches by 36 inches. It permits rip cuts up to 38 inches and rotates up to 90 degrees for precise angle cuts.
Circle 147 on Reply Card • freeproductinfo.net/rer
The HYD-TB11H towable hydraulic earth drill from Little Beaver is designed for easy maneuverability. The drill also features forward and reverse auger rotation for convenience and a three-position, 180-degree movable handle for drilling right next to buildings or other structures. The drill requires less than 20 pounds of force to pivot to the digging position.
Circle 148 on Reply Card • freeproductinfo.net/rer
Indeco North America introduces the IRC series rotary cutting head to its line of non-impact demolition attachments. It is a compact tool that can handle different types of trenching and demolition jobs. The rotary cut-ting head is designed for jobs where materials are too soft for a hydraulic breaker or too hard for a bucket to be used and can be directly mounted to an excavator.
Circle 149 on Reply Card • freeproductinfo.net/rer
712RER2008
Nikko Tanaka announces the TPS-260PF pole saw, which cuts branches up to 8 inches in diameter and features a lifetime drive shaft warranty. Powered by Tanaka's 25cc, 1.3-hp PureFire engine, key features include a 23-fluid ounce, see-through fuel tank, padded “D” handle, and a solid-steel drive shaft.
Circle 145 on Reply Card • freeproductinfo.net/rer
712RER2009
Makita's model BO4556K finishing sander features an ergonomically designed rubberized palm that fits like a glove with even pressure and easy control. These comfort features are combined with a 2-amp motor that produces 14,000 OPEM for fast and smooth sanding. In addition, the precision-engineered all-ball-bearing construction significantly reduces vibration and noise.
Circle 145 on Reply Card • freeproductinfo.net/rer
