SHOWROOM

The BGL counterbalanced Walkie Lift Truck from Blue Giant combines the advantages and versatility of a sit down lift truck with economy and efficiency. The product is suitable for just-in-time distribution and manufacturing operations, general loading dock area and warehouse use. From the wide view heavy-duty I-beam mast to the high chassis under clearance to the open top battery compartment (designed for side or top loading) to the Blue Giant sealed drive train, the lift truck is designed to reduce material handling costs.
www.bluegiant.com • 905/457-3900
RS # 184

Diamond Slicers/Cleaners

The Blastrac PrepMaster diamond slicers and cleaners offer a new alternative to traditional diamond grinders and scarifiers. These systems prepare concrete surfaces, leaving the flooring surface ready for application of new coatings, tile or carpet. The products feature a unique floating head design with overlapping diamond plugs to provide a consistent pattern with no voids in coverage, even over rough or uneven surfaces. For versatility, the systems may be configured to perform both slicing and cleaning, or simply cleaning.
www.surfacepreparation.com
281/431-5081
RS # 185

Excavators

The 312C and 315C hydraulic excavators from Caterpillar offer improved performance through increased horsepower and hydraulic flow, enhanced controllability and a new cab interior layout for optimum operator efficiency. Both models use the proven open-center, two-pump hydraulic system. The 312C and 315C have increased hydraulic flows of 6 percent and 13 percent, respectively. The hydraulic cross-sensing system improves productivity with faster implement speeds and quicker, stronger pivot turns.
www.cat.com • 309/675-8995
RS # 186

Plate compactor

A 119-pound operating weight and 13.4-inch plate width make the BP8/34 from Bomag simple to maneuver in confined spaces. Two people can easily load and unload the unit. The plate's handle can be removed without the use of tools to further simplify transport. Powered by a 4-horsepower Honda GX120 gasoline engine, the product offers a frequency of 5,400 vibrations per minute and 1,800 pounds of centrifugal force. The engine features a maintenance free transistor ignition, automatic low oil level shutdown and a recoil starter.
www.bomag-americas.com • 800/235-0008
RS # 187

Air Mover

The easiest and cheapest method to reduce construction-heating costs on any jobsite is by circulating heat throughout the building. The new AM-140 air mover from Flagro Industries provides 14,000 CFM of free air to move either hot or cold air where required. It is ruggedly built and stackable for storage.
www.flagro.on.ca
905/685-4243
RS # 188

Crane

Grove introduces its all terrain crane, the GMK4090. The four-axle crane is a 90-ton capacity model with a five section, 142-foot main boom, which places it between the GMK3050 and GMK5120B models. It also offers the longest boom and jib configurations in the four axle AT class. The crane uses the MegaForm boom design for strength and rigidity and the Twin-Lock double pin locking and unlocking boom system. A 33/56-foot bi-fold swing away jib offers hydraulic lifting capabilities from 5E to 40E while under load.
www.groveworldwide.com • 717/597-8121
RS # 189

Genie

The GS-2632 from Genie has a 26-foot platform height, a platform width of 32 inches and a 90-degree turning radius. The product offers safety features such as a dual axis tilt-level sensor that provides maximum utility and an audible alarm system that warns operators of unsafe conditions. It is used in factories, oil refineries, warehouse stores, older buildings with single door access only, churches with high sanctuaries and older schools with divided double doors.
www.genielift.com • 800/536-1800
RS # 190

Tractor

Ingersoll Equipment Co. introduces its 7020 LBH compact four-wheel drive tractor. Engineered as an integral part of the tractor and frame, the loader has a heavy-duty lift arm with a reinforced bucket for maximum strength and single lever control operation. Lift capacity of the bucket is 750 pounds at full height, and the backhoe is coupled to the tractor via mounting arms that are connected to a counter weight. It offers a 92-inch digging depth with joystick controls and a selection of buckets from 8 to 24 inches.
www.ingersoll-inc.com • 920/582-5000
RS # 191

Surface Grinder

To provide additional power for more demanding applications, General Equipment Co. introduces the SG24/E3HP surface grinder. Powered by an enclosed, fan-cooled 3-horsepower electric motor, the unit provides extra power for job applications where a gasoline engine is not practical or is prohibited by regulations. It features standard twin, counter-rotating discs that can work a 12- by 24-inch area. Other attachment systems are available for breaking up deposits of grease, rubber carpet backing and industrial residues; cleaning concrete, asphalt and tiles; producing exposed aggregate slabs; and buffing and polishing delicate terrazzo and marble floor surfaces.
www.generalequip.com
800/533-0524
RS # 192

Scissor Lift

JLG introduces the Model 2632E2, a narrow-width scissor lift for warehousing, construction and maintenance operations featuring a 26-foot platform height and extended-duty batteries. With a width of 32 inches and stowed height of 72 inches, the machine can pass through standard doors and be maneuvered in narrow aisle applications. Four 6V deep cycle batteries each provide power with 245 amp-hour storage capacities. The platform includes a 3-foot rollout extension and a capacity of 500 pounds.
www.jlg.com • 717/485-5161
RS # 193

Welder

The Lincoln Electric Co. introduces the Classic 300G pure DC generator gasoline-powered engine-driven welder. The product offers 300 amps DC at 60 percent duty cycle. It has five current ranges with adequate control in each range for stick pipe welding and other arc welding processes. The unit's all copper windings enhance arc stability to produce outstanding arc characteristics for difficult applications. In addition to its welding capabilities, the 300G generates 3,000 watts of AC auxiliary power from 115V or 230V duplex receptacles.
www.lincolnelectric.com • 216/481-8100
RS # 194

Compact Loader

PowerHouse Equipment introduces the Prodigy, a 13-horsepower compact loader that can trench, auger, till, move materials and much more. The product's attachments include standard and mulch buckets, trenchers, auger power heads, 6- to 24-inch augers, tillers, rippers and tow hitches. The loader and its attachments can be transported with ease on a custom built trailer. It is a valuable tool to increase productivity while reducing the laborers necessary to complete the job.
www.powerhouseequipment.com 800/476-9673
RS # 195

Dome Sensor

RAB Tuff Dome outdoor sensor can control up to 500 watts incandescent light or 250 watts fluorescent light with up to three floodlights. The sensor, which can also mount remotely, features a vandal proof die cast metal case and a hard poke-proof lens. The palm-sized unit, sporting a 180-degree detection pattern, fits round and rectangular boxes covering oversized openings.
888/722-1000
RS # 196

Spreader

Designed to be the most economical choice for private and small commercial operations, SnowEx, a division of TrynEx International, introduces its Micro Pro 375 Tailgate Spreader. Specifically developed for snow and ice control, the product offers a heavy-duty material flow gate, maximum torque transmission and low-maintenance engineering. Standard with a 10-foot control cable, the material flow gate calibrates and controls material flow. This allows the operator to distribute the right amount of sand or salt for each individual application.
800/725-8377
RS # 197

Grapple Fork

Second Look's grapple fork provides a tractor/ski loader operator with added load capacity and security. The fork's large opening apparatus can accommodate loads as heavy as 1,200 pounds and as large as 27 railroad ties. Its four oscillating teeth articulate to help secure uneven, lopsided loads. Two cylinders that keep loads in place during transferring or transporting provide a 1,400-pound grip at 3,000 hydraulic psi.
www.secondlookinc.com • 785/842-8909
RS # 198

Telescoping Crane

The new Series 600D telescoping crane from National Crane features increased lift capacity and maximum vertical reach. Rated with a maximum capacity of 36,000 pounds and equipped with a vertical reach of 138 feet, the crane has a proportional boom extension system that provides more efficient weight distribution and higher lifting capacities in normal working radiuses. Wider 19-foot, 11-inch hydraulic outriggers provide stable, efficient leveling, even on uneven ground, and retract smoothly without binding under load. The newly designed integral boom anti-two-block system routes ATB wire through the boom to eliminate external wire reel, while increasing reliability and making servicing quick and easy.
402/786-6300
RS # 199

Generators

The 6,000-watt DeWalt DG6000 heavy-duty gas generator has Honda's premium 11-horsepower overhead valve GX engine. A special air intake, choke, and carburetion system allows for easy starting regardless of air temperature, while the muffler and idle control reduce noise and help with fuel efficiency. For increased durability, the DG6000 has a brushless alternator that is designed to eliminate the need for alternator maintenance. Output is rated at 5,000 watts continuous AC power and 6,000 watts max power for running worksites that use high-amp tools.
www.dewalt.com • 800/433-9258
RS # 200

Vacuums

CFR Environmental Cleaning Systems introduces the Enviro Clean Series vacuums. The vacuums are all equipped with state of the art high-filtration systems and operator ergonomics. The vacuums weigh only 8 pounds and come standard with a top fill paper bag system that yields maximum productivity. The 14- and 18-inch vacuums offer two motor upright performance with a standard HEPA filter.
www.cfrcorp.com • 800/533-2557
RS # 401

Trailer-Mounted Water Jet

Electric Eel Mfg. Co. Inc. introduces the model 2514 trailer-mounted water jet. Designed to clean 3- and 12-inch diameter lines, the product comes standard with 300 feet of ½-inch diameter hose. A 24-horsepower Honda engine powers the unit, and a triplex pump with pulsation produces 2500 psi/14 gpm. Other features include an auto reversing reel, 300-gallon capacity water tank, side mounted tool boxes, engine and reel covers, single axle trailer with 14-inch wheel and 150 feet of 5/8-inch garden hose on a manual reel.
www.electriceel.com • 800/833-1212
RS # 402

Roadcrusher

The Fahr Roadcrusher can continuously crush oversized waste material on the road surface, avoiding costly handling expenses generated when moving material to and from a stationary crusher. It can crush asphalt, concrete and any rock and has been used for forest road development, low volume road resurfacing and rails-to-trails projects. The machine resurfaces by scarifying the road surface and pulling the oversized material from the roadside and ditches into the middle of the road to form a windrow. Once the windrow is formed, the machine is driven over the material and completely processes all material as large as 16 inches into 2 inches minus usable aggregate.
www.fahrindustries.com • 888/983-7333
RS # 403

Trailers

Rogers Fixed Gooseneck Series has a simple and efficient design, keeping the initial purchase price affordable and maintenance costs low. Increased ground clearance for off road conditions, plus the speed and convenience of rear loading will improve hauling efficiency. Increased deck length can haul longer, wider and heavier loads to the jobsite. Features include heavy-duty landing legs, full width or narrow gooseneck design, unitized frame construction, air-dried oak decking, sloped rear extension, manual or hydraulically operated rear loading ramps, heavy-duty spring or air ride suspensions, rubber-mounted sealed beam light system with modular wiring harness and industrial finish coat with undercoating.
www.rogerstrailers.com • 814/756-4121
RS # 404

Constant Force Pitch

Suitable for 36- and 46-inch models, the MBW's constant force pitch adjusts trowel blades with the simple pull of a lever. A constant forces spring is behind the mechanism's capability of smooth, quick control. It is a maintenance-free control, requiring no lubrication or other regular upkeep. No adjustment is necessary when changing trowel blades, whether finish, combination or snap-on float; simply change over the blades and the trowel and constant force pitch are ready to go.
www.mbw.com • 262/644-5234
RS # 405

Pressure Washer

The HPW-1000 hot water high-pressure washer from Goodway provides extra cleaning power with heat. Caked-on grease, hardened chewing gum, mold and mildew and other heavy grime are quickly removed from any surface. The unit comes equipped with a double wand and a soap application nozzle. Each machine is powered by an electric motor and heats water to 200 F through a Beckett diesel burner.
www.goodway.com • 800/243-7932
RS # 406

Pump

Multiquip introduces the Mayco MG302, which combines the best features of the popular Mayco PF30 and Essick MG30 pumps. The product is a reciprocal, two-piston, ball-and-check pump designed for high productivity plastering and fireproofing. This pump handles swimming pool plaster, Pebble Tec, basecoat plaster and other cement-based spray-applied repair mortars as well.
www.multiquip.com • 800/421-1244
RS # 407

Walk-behind Trowels

Wacker's new 36- and 48-inch trowels offer speed and performance through the use of an innovative constant variable transmission system. The trowels deliver rotor speeds from 20 to 170 rpms without the use of any special speed adjustment kits or installation downtime. The 36-inch wide diameter models, CT 36AVT and CT 36AVP, weigh 205 pounds and feature an 8-horsepower Honda engine. The 48-inch models, CT 48AVT and CT 48AVP, weigh 265 pounds and are powered by an 11-horsepower Honda engine.
262/255-0500
RS # 408