Terex ASV offers its tracked utility trailer designed for hauling a range of materials or equipment over rugged or soft ground conditions. Tracks are free rolling and rollers are supported by sealed, maintenance-free bearings. It connects to any vehicle with a 2-inch hitch. Multiple tie-down points are incorporated into the design to secure a variety of loads. It has a 1,975-pound operating weight, empty and 1.12-psi ground pressure, empty. Its carrying capacity is 7,000 pounds.
Reader Service No. 169 • freeproductinfo.net/rer
Felling Trailers introduces the Fixed Neck Oilfield Float Trailers with capacities ranging from 25 to 60 tons with 2 to 4 axle configurations. Construction of these trailers varies with an engineered/fabricated mainframe and 6- to 8-inch junior I-beam cross members pierced through the main beams. Standard features include heavy-duty tail roller with easily accessible bearings, pin pockets, hub-piloted wheels and LED lights.
Reader Service No. 170 • freeproductinfo.net/rer
Landoll introduces an all-new line of heavy haul detachable lowboy trailers. The 800 series has two primary models — the 835 and the 855. The 835 is a 35-ton with two or three axles. The 855 is a 55-ton with three or four axles. This new construction series of hydraulic non-ground-bearing detachable trailers have loaded deck heights down to 17¾ inches and deck lengths up to 32 feet. Standard equipment includes four, 100,000-pound high-tensile steel beams and 4S2M ABS with spring brakes on all axles.
Reader Service No. 171 • freeproductinfo.net/rer
Advance Metalworking Co.
The updated Lo Riser Trailer features a 74-inch by 16-foot carrying platform that can be hydraulically lowered to ground height. The built-in ramp allows smooth, drive-on access without any crown point for quick loading and unloading of cargo or equipment. When lowered, the trailer allows a minimum 4-degree angle suitable for low ground clearance or reduced gradeability vehicles. The Lo Riser trailer has a maximum payload capacity of 14,000 pounds.
Reader Service No. 172 • freeproductinfo.net/rer
XL Specialized Trailers
XL Specialized Trailers introduces a 55-ton, 53-foot hydraulic gooseneck trailer for hauling heavy construction equipment. With a low-profile upper deck and a flip-neck design, the new XL 110 HDG trailer is designed to accommodate multiple truck sizes and handle loads up to 110,000 pounds distributed. The upper deck comes equipped with a 13-hp Honda engine with dual hydraulics. The main deck offers operators a 24-inch loaded deck height and an 8-inch ground clearance. The center deck is covered with 1 3/8-inch Apitong decking.
Reader Service No. 173 • freeproductinfo.net/rer
The ET 7000 from Haulotte Group is designed to handle payloads of up to 7,000 pounds. With a bed size of 75 by 144 inches, this trailer is designed for hauling scissorlifts, skid steers, trenchers, personnel lifts, and all types of powered walk-behind equipment. The ET 7000 has 6 degrees of ramp grade, which allows for easy loading and unloading of otherwise difficult machines. It comes equipped with a deck that hydraulically lowers to the ground so it is easily operable by one person.
Reader Service No. 174 • freeproductinfo.net/rer
With the convenience of ground-level loading, Triple-L flatbed drop deck trailers are designed to carry equipment with low ground clearance or poor traction such as scissorlifts, industrial sweepers, landscaping equipment, pavers, rollers and compactors. Triple-L trailers incorporate a Power Deck hydraulic system that allows the operator to raise and lower hydraulically in less than 15 seconds so loading and unloading a trailer is more efficient. There is no need for ramps, ascending grades or using additional personnel. Standard features include two lockable steel compartments, a quick-adjust tongue jack, heavy-duty tie-down rings and a 12-volt system that powers the hydraulic pump used to lower and raise the deck.
Reader Service No. 175 • freeproductinfo.net/rer
Stens offers common replacement parts for trailers including hitch balls, ball mounts, hitch pins, bolt-on lashing rings, incandescent trailer lights, circuit testers, trailer connectors, electric adapters and more.
Reader Service No. 176 • freeproductinfo.net/rer
Talbert Manufactuing offers its 55-ton Raised Center trailer, which features a non-ground bearing gooseneck; a raised 26-foot center deck that allows a 15½-inch loaded deck side height to accommodate various transport height regulations. It is also equipped with the Equalizer — a nitrogen-assisted dampening system designed to balance loads in all terrains.
Reader Service No. 177 • freeproductinfo.net/rer
Kioti introduces its Ultimate Transport Vehicle, the MECHRON, which is driven by a fuel-efficient 22-hp, 3-cylinder Daedong diesel engine. The Kioti UTV offers a 56.2-inch-wide dump bed for a 1,600-pound payload capacity. For a smooth ride over rough terrain, the MECHRON includes a MacPherson strut-like suspension up front and independent Dual-A arm wishbone with adjustable coil springs in the rear.
Reader Service No. 178 • freeproductinfo.net/rer