The Advance Metalworking Co.
The Lo Riser trailer from The Advance Metal-working Co. features a 74-inch by 14-foot, 8 inch, load-carrying platform that can be hydraulically lowered to ground height. This 12,000-pound capacity inclining platform trailer also offers a built-in ramp allowing for smooth, drive-on access without any crown point for quick loading and unloading of equipment. When lowered, the trailer allows for a minimum 5-degree angle for low ground clearance or reduced gradeability vehicles.
The Rental Show Booth 5453
Reader Service No. 185 • freeproductinfo.net/rer
The Landoll 900 series Traveling Tail trailer is available in either 35- or 50-ton capacities and features a simplified, one hydraulic control for three hydraulic operations. This design has no hydraulic lines, hinges or pins behind the tail to contend with or maintain. Available in either tandem or triple axle, the 900 series is offered in 12-, 14- or 15-foot tail lengths. A low load angle (as low as 11 degrees) is possible with the 15-foot tail. Also available is a double drop option, which drops the deck by 8 inches for hauling trailer equipment.
The Rental Show Booth 6909
Reader Service No. 186 • freeproductinfo.net/rer
Featherlite Trailers' all-aluminum model 1586 is built to haul cargo ranging from skid-steer loaders to hay bales. Loading and unloading this utility trailer is easy with the optional beaver tail and flip over ramp. The folding step allows operators access to the 8-foot, 6-inch-wide cargo area. Rubber torsion axles with electric brakes provide a smooth ride. The 1586 also includes a 2-inch rub rail with stake pockets on 24-inch centers to aid in securing the cargo.
Reader Service No. 187 • freeproductinfo.net/rer
The Terex HFT 70RS rental equipment trailer offers enhanced traction on the ramp, which makes it suitable for loading equipment with tires or in need of additional traction. The main deck on the trailer is 29 feet, 5 inches long and 102 inches wide, along with additional length on the 9-foot gooseneck deck and the 10-foot extended hydraulic ramp. The tail section provides increased ramp length for an easy loading slope with a total length of 14 feet, 6 inches. The folding tail flips out and lowers to the ground and creates a 6-degree break-over angle that allows a wide range of equipment to drive up the ramp and onto the main deck without using a winch.
The Rental Show Booth 6555
Reader Service No. 188 • freeproductinfo.net/rer
The Triple-L Model 7612 trailer from JLG is a tandem axle trailer featuring a 6-foot by 12-foot deck and 7,000 pounds cargo capacity. The Triple-L trailers incorporate the Power Deck hydraulic system that allows the operator to lower and raise the deck hydraulically in less than 15 seconds. Standard features include two lockable steel compartments, heavy-duty tie down rings and a 12-volt system that powers the hydraulic pump used to lower and raise the deck.
Reader Service No. 189 • freeproductinfo.net/rer
Up-N-Atom's Retriever transport bed uses the truck's air system instead of hydraulics to power the horizontally stable deck and multi-position, extended ramp. The curved deck creates a shallow loading angle (11 to 14 degrees) for safer loading and eliminates the breakover on tracked equipment. While traveling between stops, the truck's air system fills an 80-gallon pressure tank mounted on the Retriever to 120 psi.
Reader Service No. 190 • freeproductinfo.net/rer
Jerr-Dan introduces the Premium 6-ton carrier bed. The deck's larger, roll-formed rubrails provide increased structural strength, and the weld process ensures a smooth outer surface. The 102-inch-wide deck features a full-length 10-gauge 50 ksi pressed-diamond decking. The carrier bed is available in 19-, 20- and 21-foot lengths. Underneath, 6-inch cross members offer improved corrosion protection.
Reader Service No. 191 • freeproductinfo.net/rer
Bil-Jax/Haulotte Group offers a line of Escalate trailers that feature a drop deck design for maximum safety and ease of loading and unloading equipment. The ET 7000 is designed to handle payloads of up to 7,000 pounds. With more than 6 feet, 2 inches of bed width and 12 feet of length, this trailer is suited for hauling scissorlifts, skid-steer loaders, trenchers, and various types of powered walk-behind equipment. Other trailer capacities are available ranging from 4,000 to 12,000 pounds.
The Rental Show Booth 5006
Reader Service No. 192 • freeproductinfo.net/rer