Temp-Air

The CH-Series of portable heaters from Temp-Air are designed for versatility with higher discharge temperatures and comparatively low air capacities. Available from 300,000 to 1-million Btu per hour, these units are well suited for loose enclosures such as under concrete deck pours and spot heating applications. Installed either inside or outside, all CH-Series heaters draw 100-percent fresh air through the intake, and discharge tempered air controlled by a remote thermostat, while automatically cycling from low- to high-fire to maintain the desired temperature.
Reader Service No. 152 • freeproductinfo.net/rer

MTA Distributors

The White Radiant Outdoor LP Heater provides 40,000 Btu per hour, Piezo, push-button ignition and an automatic safety tip-over device. A vertical-shaped heat emitter, 34-inch rust-free aluminum reflector and fully integral ignition control valve are additional features. No electricity is required and a wheel kit is included. Applications include patio, deck and pool areas.
Reader Service No. 153 • freeproductinfo.net/rer

Wacker Neuson

The new Wacker Neuson portable Cub 300 indirect-fired heater provides up to 80-percent net heater efficiency. The Cub 300 has a maximum heat input of 302,000 Btu per hour at an airflow rate of 3,690 cubic feet per minute. The unit runs on kerosene or No. 1/No. 2 diesel fuel. The Cub 300 offers lower operating costs by producing more heat per gallon of fuel consumed, resulting in dramatic fuel savings. All models of the Cub 300 feature a 100-percent stainless-steel firebox and heat exchanger for long-lasting durability and robust performance.
Reader Service No. 154 • freeproductinfo.net/rer

SunStar Heating Products

The new heavy-duty SunStar RCH Series spot heaters do not use electricity and can comfortably heat an enclosed area of up to 2,500 square feet without using fans or moving parts common with many other spot heaters. The heaters are CSA design certified and rated at 95,000 Btu per hour for propane models or 100,000 Btu per hour for natural gas models. Both models are available in manual or thermostatic control. A flame failure safety device is provided for safety. In operation, a stainless-steel heat exchanger beams radiant heat around the entire circumference of the heater for a continuous flow of heat.
Reader Service No. 155 • freeproductinfo.net/rer