Dosko's Chipper/Mulcher series offers the Dosko 3-in-1 Flail System — double-edge flails that have been heat treated to 60 RC hardness and are easy to service. The flails can be sharpened on both sides and are reversible, even in the field. Dosko's chipper/mulcher models are towable and powered by Honda engines.
Reader Service No. 150 • freeproductinfo.net/rer
The 4-inch chipping capacity and 48-inch free-swinging shredding hammers of the Merry Commercial SC262-18VEMC Chip N Shred by MacKissic make it suitable for lawn and garden clean-up and debris reduction. The unit features heavy-gauge commercial construction combined with the 18-hp twin-cylinder Briggs & Stratton Vanguard engine and heavy-duty rotor engagement system with load-free starting and overload protection. The SC262 also features an independent Flexride suspension system.
Reader Service No. 151 • freeproductinfo.net/rer
The new 14-hp Shredding TruckLoader from Little Wonder is a commercial debris loader that is manageable for a one-man operation and light-capacity trucks. The unit is constructed with durable composite and polyethylene materials that are 50-percent lighter than steel. The lightweight polyethylene discharge chute is molded to cradle a special rubber compound liner while the rugged 12-gauge steel housing is lined with a hard-wearing, noise-absorbing conveyor belt material. The intake hose is made of translucent flexible urethane that is abrasion and tear resistant with a smooth interior for unrestricted material flow and features a new tubular steel wide-grip handle for operator comfort.
Reader Service No. 152 • freeproductinfo.net/rer
Vermeer Corp. enhances its BC1000XL brush chipper with two diesel engine options — a 49-hp Cat C2.2L Tier-4a or 85-hp Cummins B3.3 Tier 3. Both options offer the power needed to process material up to 12 inches in diameter. Other standard features include the patented SmartFeed system, a clutchless PTO system and the Bottom Feed Stop Bar. The unit also features a steel hood for added durability on the jobsite and the relocation of the control panel to the rear of the machine for easier access.
Reader Service No. 153 • freeproductinfo.net/rer
The new Wood-Pro manual-clutch model 30Qi22E AVP from Vandermolen Corp. is powered by a 22-hp V-twin Kohler Pro-Command electric-start engine equipped with speed-monitoring tachometer that doubles as an hour meter. The AVP features a triple-action processor — knives, flails and fixed cutter — to generate a fine mulch and small chip size suitable for mulching or ground cover. Chipping capacity is up to 6-inch-diameter limbs. The unit comes with a 2-inch ball hitch and 1,500-pound torsion bar axle for easy towing.
Reader Service No. 154 • freeproductinfo.net/rer
The Morbark Beever M12R brush chipper features design and productivity improvements. Key modifications to the Beever M12R include a reduced overall size, widened infeed, separated fuel and hydraulic tanks and the incorporation of a chambered air impeller. Shortening the machine length by 15 inches makes it easier to park and maneuver. The increased infeed width results in a 25-percent greater infeed perimeter opening making the feeding of branchy material less difficult. Separate fuel and hydraulic tanks eliminate the chance of cross contamination between fuel and hydraulic oil; and a separate fan chamber increases air flow with less “blow back” at the operator.
Reader Service No. 155 • freeproductinfo.net/rer
Rayco's RC814 is a compact, 8-inch-capacity chipper equipped with VersaFeed automatic feed control and a 44-hp Kubota diesel engine that meets Interim Tier 4 / Stage IIIA emissions standards. The RC814 features a Torflex axle, allowing it to tow smoothly — even behind compact pickups. The RC814 features hydraulic feed wheel lift and crush, and has an 8- by 14-inch infeed opening. A dual-feed wheel system is optional for operators who require extra muscle.
Reader Service No. 156 • freeproductinfo.net/rer
The Model 3090 Track is a self-propelled version of the popular Model 3090 drum-style whole-tree chipper. To make the 3090 a mobile chipper, Bandit Industries utilizes a Caterpillar 325EL undercarriage outfitted with either 700- or 800-millimeter-wide pads. Fully optioned with a cab and loader, the footprint for the Model 3090 Track is just over 11 pounds per square inch. It uses a 37-inch-diameter drum with a 30- by 36-inch opening, and features a four-wheel, diagonal feed system consisting of two, 36-inch top-feed wheels set on an angle. Power options include Caterpillar, Cummins or John Deere diesel engines, ranging from 535 to 630 hp. The 3090 Track can accept material up to 24 inches in diameter, and combined with a stationary high-flow discharge system, it can produce as much as 80 tons of chips per hour.
Reader Service No. 157 • freeproductinfo.net/rer