The following products were contenders in the 2004 Innovative Product Award competition. Many received large numbers of votes for their contributions to continuing product excellence and achievement in engineering and design. The remaining contenders will be featured in the February issue.
Compaction Equipment
MMD Equipment Sakai CompactionPro 65 Rammer
The all-new CompactionPro 65 148-pound rammer hits 30 percent harder with 50 percent less handle vibration, and can be transported lying down. Higher impact delivers 4,380 pounds per blow measured in accordance with CIMA LEMB Standard No. 1. Its stronger handle design reduces vibrations by 50 percent and gives stable handling in trenches. A patented bellows sealing method allows the rammer to be stored on its side and a diaphragm carburetor allows storage or operation while horizontal. A 3-hp, 4-cycle Honda GX100 rammer engine eliminates fuel mixing, is quiet and EPA compliant, and triple-stage filtration gives maximum engine life.
Circle 156 on Reply Card ▸ freeproductinfo.net/rer
MMD Equipment Sakai PavingPro 270 Vibratory Roller
The all-new PavingPro 270 compact vibratory ride-on roller delivers superior power, traction and finishing to the rental market. It features large roller engineering in a compact machine including ProDrive hubs, totally enclosed within the drums, which give 2.2-inch close-approach compaction, and 13-inch curb clearance on both sides of the machine with zero end overhangs. A patented ProRide double-drum suspension system isolates vibrations from the operator. The unit has 34 percent grade climbing ability and an 18-hp Honda GX610 easy-start engine. Other features include all-steel construction and extra-thick ½-inch drums with 25mm tapered edges, and the largest frame-enclosed water tank in its class delivers longer run times.
Circle 157 on Reply Card ▸ freeproductinfo.net/rer
Compressors/Air Tools
Ingersoll-Rand P65
The P65 portable rotary-screw air compressor has been engineered with industry-leading technology and is designed to exceed customer expectations for efficiency and performance in a compact, lightweight design. The unit has a noise rating of 71dBA, which exceeds Environmental Protection Agency requirements. Made to work in tight or confined spaces and for use in residential areas, the P65 weighs 948 pounds and measures 96.5 inches with a fixed tow bar. The 65-cfm, 100-psi compressor runs off a high-performance 23.5-hp Kubota diesel engine and is matched to single-tool applications. The unit comes standard with a drip-proof base to prevent environmental contamination by preventing fluid spillage.
Circle 158 on Reply Card ▸ freeproductinfo.net/rer
Computer Software
Alert Management Systems YardScan 1.0
Using new economical “off-the-shelf” wireless PDA devices, this new software module extends the counter computer's control out to the rental yard. With very little operator training, you can speed up rental center operations, eliminate rework and improve accuracy. Using a portable hand-held PDA, assigning rental equipment to a contract for check-out is as simple as pointing and zapping a bar code label. Check-out and check-in features include the ability to update meter or mileage, enter fuel level, correctly assign no-charge accessories and more. Using modern “Wi-Fi” technology, rental contracts are updated instantly, before the customer even gets to the counter.
Circle 159 on Reply Card ▸ freeproductinfo.net/rer
SmartEquip e-CommercePro, e-FleetPro, e-DealerPro
SmartEquip has extended its electronic parts ordering and service support system directly into the business systems of industry leaders such as Multiquip and JLG. Users, dealers and fleet operators can select parts from intelligent schematics and interactive parts lists, and now can inquire on availability, submit electronic purchase orders, and check order status — all in real time. Pricing, availability, shipping and billing information are accessible 7/24/365. Tied directly to the management system of a rental or fleet operator, SmartEquip is delivering the only end-to-end integrated electronic parts supply conduit between manufacturer and user.
Circle 160 on Reply Card ▸ freeproductinfo.net/rer
Concrete Working Equipment
CDCLarue Hum-B Upright Edge Grinder
With the easy-to-use 110-volt Hum-B Edge Grinder, users can stand upright to grind more comfortably and aggressively with better control than on their hands and knees. Equipped with a 2-inch vacuum port and patented Dust Grabber shroud, the Hum-B is designed to provide 99 percent dust-free performance. Each Hum-B comes with a 6,000-rpm angle grinder, 12-segment diamond wheel, 5-inch caster wheels, 150-watt halogen light and gas-filled shocks to ensure level grinding. Because it covers more square footage with less time and effort, the Hum-B is designed for rental customers grinding concrete, stone and masonry, or removing paint, adhesives and epoxy floor coatings.
Circle 161 on Reply Card ▸ freeproductinfo.net/rer
Edco TMC-7 Edge Grinder
The 7-inch turbo edge grinder features quick-change, three-position articulating frame adjustment for left angle, right angle or straight position grinding. A four-position dust shroud allows flush grinding against any vertical surface in the left angle, right angle or straight position. Multiple-position handle assembly allows the operator to work behind the unit for edge grinding or in front of the unit to control the amount of grinding pressure applied. Adjustable tubular handle construction provides the operator maximum grinding flexibility and allows for complete clearance of any vertical surface. The unit comes standard with flex head assembly for flatwork grinding and features tapered roller bearings for longer life with less maintenance.
Circle 162 on Reply Card ▸ freeproductinfo.net/rer
Partner K3000 Electric and Spray
The Partner K3000 electric cutter offers new alternatives and possibilities for cutting both outdoors and indoors. Featuring Elgard, an electronic overload protection system, the new electronic SoftStart, and a new ergonomic handle system, the K3000 also offers a spray for using the machine with the wet-cutting function. It is designed to be one of the market's most powerful electric handheld cutters and has a 14-inch blade capacity. The power source is a strong 230-volt electric motor, and with the electronic SoftStart system, the machine can utilize the power from a normal wall outlet. The Elgard system pulsates to indicate a built-in warning if the machine is approaching overload. The new built-in quick-lock on the spindle makes blade change easier.
Circle 163 on Reply Card ▸ freeproductinfo.net/rer
Target HD 6 Core Drill
A lightweight heavy-duty handheld core drill, the new HD 6 handheld drill motor has a high power-to-weight ratio and contains advanced electronics for maximum power, flexibility and reliability. It weighs approximately 12 pounds and can be used on concrete and masonry. The HD 6 is designed for working in tight areas and a front-mounted rotating support handle allows both right- and left-handed drilling. Other key features include electronic overload protection to prevent motor damage; Softstart electronic current limiter to ensure a soft start and less load on the electrical system; Smartstart to reduce the rpm by 50 percent when starting a new hole; and Elgard electronic clutch and mechanical slip clutch to protect the motor and the operator from overload and drill kickback.
Circle 164 on Reply Card ▸ freeproductinfo.net/rer
Metal Forms Corp. Speed Screed Mighty Lite
The Mighty Lite truss screed features an innovative parabolic design with a steel frame combined with an aluminum backbone and blades for the optimum combination of strength and lightness. The unique frame design also reduces concrete build-up and eases cleaning. Weighing only 7.5 pounds per foot, the Mighty Lite transports easily around any jobsite and operates on plastic forms (Poly Meta Forms) allowing for cost-effective concrete finishing. The Mighty Lite quickly adjusts to variable width pours with 5- and 10-foot sections that can be quickly assembled in the field. It is also low maintenance with modular parts and components for easy placement.
Circle 165 on Reply Card ▸ freeproductinfo.net/rer
Earthmoving Equipment
Auger Master Model T
The new Auger Master Model T is a self-contained hydraulic auger system in a tow-behind model. Even most riding mowers can tow this unit. It is a planetary drive unit with forward and reverse, a more than 180-degree swing boom and an 80-inch telescopic boom. It is powered by the dependable electric-start V-Twin Honda. The unit imparts virtually no damage to existing landscaping, requires little maintenance and is easy to operate. Other features include no sheer pins to break, a 2-inch hex drive, digging depth up to 5 feet, auger bit diameters from 4-inch to 30-inch landscaping bits, and swing out hydraulic outriggers.
Circle 166 on Reply Card ▸ freeproductinfo.net/rer
Ditch Witch XT-850
The Ditch Witch organization announces the creation of its new compact utility vehicle: the Ditch Witch XT850. A cross between the company's SK (mini skid steer) and MX (mini excavator) series, the XT850 is a powerful, lightweight excavator/tool-carrier with options that include trailer, stands, and enough attachments to handle virtually any underground construction task. A special feature of the XT850 is its patent-pending 260-degree excavator sweep, which allows offset digging capability from one point.
Circle 167 on Reply Card ▸ freeproductinfo.net/rer
Gehl 40 Series Skid Loader
The new 40 Series is a mid-size family of skid-steer loaders designed with an optimized combination of power, speed and performance. The four 40 Series models provide the operating precision and maneuverability contractors want in compact loaders, with high horsepower, superior hydraulic power, increased load capacities and spacious operator compartments. Operating weights range from 6,200 pounds to 7,800 pounds. SAE operating loads range from 1,500 to 2,400 pounds. New 2011 Series Deutz diesel engines offer from 46 to 82 hp. The 40 Series has an all-new, larger operator compartment with more head, shoulder and legroom, plus overall greater comfort, the company says.
Circle 168 on Reply Card ▸ freeproductinfo.net/rer
Gehl 7000 Series Skid Loader
The new Gehl 7000 Series consists of Model 7610, which has an 86-hp Perkins Tier II diesel engine and 3,400-pound SAE-rated operating load. The 7810 is powered by a 115-hp Perkins Tier II turbo diesel engine and has an industry-high 3,675-pound rated operating load. With a 3,300-psi hydraulic system relief pressure, the new 7000 Series delivers a bucket breakout force of nearly 7,900 pounds. A 40-gpm high-flow auxiliary hydraulics system is optional and it offers lift heights of nearly 12 feet. Additionally, a two-speed drive is available, which offers ground speeds up to 13 mph. The extended 55-inch wheelbase, combined with the floating lift arm action of the optional Hydraglide ride control system, makes for a smoother ride.
Circle 169 on Reply Card ▸ freeproductinfo.net/rer
Ingersoll-Rand BL-275
The BL-275 side-shift backhoe loader is designed for utility installation, landscaping, rental applications, general construction and repair work. The BL-275 provides a loader lift capacity of 2,250 pounds and a loader breakout force of 3,825 pounds as well as a maximum digging depth of 10 feet, 6 inches. Four-wheel drive, all-wheel steering makes the machine easy to maneuver with a tight turning radius. The side-shift BL-275 allows for operation in confined spaces and can be folded into a tight package for transport and operation as a loader or an attachment carrier.
Circle 170 on Reply Card ▸ freeproductinfo.net/rer
John Deere 4000 Twenty Series Compact Utility Tractors
With up to 21 percent more horsepower and more torque than the models they replace, the John Deere 4000 Twenty Series Compact Utility Tractors have the power to make it happen with their new John Deere 2.4-liter, 4-cylinder turbocharged engines. The instrument panel features the Performance Tracking System, which allows operators to monitor all tractor functions with the touch of a button. Additional features such as the iMatch quick-coupler system, the industry exclusive LoadMatch technology, and the eHydro transmission simplifies tractor operation for both new and experienced customers. Even better, the 4000 Twenty Series tractors are more affordable than ever before with a three-year warranty and a lower cost of maintenance.
Circle 171 on Reply Card ▸ freeproductinfo.net/rer
Loegering Versatile Track System
The Loegering Versatile Track System (VTS) allows users to operate skid-steer loaders with tires or as a full rubber track undercarriage system depending on the application. This bolt-on, bolt-off rubber tracked undercarriage system for skid-steer loaders bolts directly to the hubs of the machine and requires no machine modifications for most models, and conversion takes less than an hour. Now users can work in terrain that requires a wheeled skid steer one day, then bolt on the VTS system and work in terrain that would benefit from a compact track loader the next day.
Circle 172 on Reply Card ▸ freeproductinfo.net/rer
Rayco C87D Compact Crawler Dozer
The C87D is designed to excel in site-prep work, steep slope work and rough-to-finish grading. The hydrostatic drive is engineered to maintain power-ratio and variable speed when steering. The system is sized to accommodate high horsepower so larger blade loads can be pushed through curves and the operator can easily compensate for the blade draft. This reduces the number of passes needed to move material, making the C87D more productive and lowering operating cost. The hydrostatic drive is controlled by a joystick control. The instrument panel is strategically positioned to allow the operator a clear view to the backside of the blade to gauge material flow under the blade. The steel tracks of the C87D permits precise grading and delivers long undercarriage life while allowing for narrow transport.
Circle 173 on Reply Card ▸ freeproductinfo.net/rer
Takeuchi TL140 Rubber Track Loader
Powered by an 81-hp turbo-diesel engine, the TL140 features a two-speed travel system that operates from 4.5 to 6.4 mph. The TL140 utilizes planetary final drives for increased traction force (11,250 pounds), and features an operating weight of 9,590 pounds, tipping load of 5,952 pounds, and bucket breakout force of 7,403 pounds. The TL140 runs 18-inch wide rubber tracks that provide excellent floatation for operating on soft ground, improved surfaces or in muddy conditions. The TL140 also offers a universal quick attach, pilot-operated joystick controls, and optional enclosed cab with heater, air conditioning and roll-up door.
Circle 174 on Reply Card ▸ freeproductinfo.net/rer
Volvo BL60
The new Volvo BL60 backhoe loader is equipped with a low-emission, 86-net hp, turbocharged diesel engine and a reliable, fixed-flow hydraulic system, providing power and control for a wide range of loading and digging applications in a multitude of operations. The new Volvo BL60 backhoe loader has a 14-foot, 9-inch digging depth and 11,864 pounds of backhoe bucket digging force. The 1.3-cubic yard loader bucket has a lift capacity of 5,114 pounds and 8,752 pounds of bucket breakout force.
Circle 175 on Reply Card ▸ freeproductinfo.net/rer
