JLG
JLG's 1500SJ is the first 150-foot boomlift that requires only a weight permit, the company said, and includes a telescopic jib that extends up to 25 feet for additional vertical and horizontal reach. Standard steel hoods provide improved durability. Operators receive key information with new graphic LCD displays in the platform. The 1500SJ delivers dual 1,000/500-pound capacity, three steering modes and advanced systems to assist in safely positioning the platform. The unit is designed for general contractors, glaziers, window cleaners, welders and others.
Reader Service No. 171 • freeproductinfo.net/rer
Bronto
Designed for inspecting and maintaining wind turbines and other tall structures, the 295-foot working height Bronto S-90 HLA can drive directly to a turbine to be operational in 15 minutes or less. It is able to withstand winds of 25 mph, lift 1,000 pounds of men and materials in an 8-foot by 3-foot, fully enclosed platform. Maximum horizontal outreach is 108 feet. Mounted on a six-axle chassis, the unit can navigate most terrains. One-button automatic leveling of the outriggers facilitates fast setup.
Reader Service No. 172 • freeproductinfo.net/rer
Terex
The Jib-Extend telescopic jib on the Genie Z135/70 self-propelled articulating boom extends the unit's reach from 12 feet to 20 feet and provides a 110-degree vertical range of motion to reach up and over. The Genie Fast Mast system allows operators to lower the platform to ground level without having to lower the secondary boom. The unit has a working height of 141 feet, a horizontal reach of 69 feet, 9 inches, an up-and-over clearance of 75 feet, 6 inches and a lift capacity of 600 pounds.
Reader Service No. 173 • freeproductinfo.net/rer
JCB
JCB's 512-56 is the largest machine in the company's range of telehandlers. “The 512-56 caps off our line of five high-boom, lift-and-place Loadalls with capacities ranging from 6,000 to 12,000 pounds,” said JCB deputy chairman John Patterson. The units can elevate a maximum load of 12,000 pounds with a maximum height of 56 feet and come equipped with axle-mounted stabilizers as standard for superior chassis leveling when the stabilizer legs are down. The boom is positioned high for optimum operator visibility. A hydraulic cylinder mounted underneath the outer boom extends the boom's intermediate section, with chains for second and third stages. The boom uses a Waxoyl lubricant, exclusive to JCB, that is dry to the touch and thus does not attract sand and dirt that could increase boom-pad wear.
Reader Service No. 174 • freeproductinfo.net/rer
Haulotte
The HB86TJ+ telescopic platform boomlift with a 19 foot, 8 inch telescopic jib has an outreach of 75 feet, 6 inches and an 8-foot platform, and can lift loads of up to 772 pounds. The unit has a narrow fixed-width frame, an oscillating axle and a differential wheel lock to allow for operation in a wide range of areas.
Reader Service No. 175 • freeproductinfo.net/rer
Snorkel
The A62 JRT and T66JRT booms, using Snorkel's new common Polaris chassis, will be shown to the rental industry for the first time in November at the Lift & Access Showcase. The A62JRT 62-foot articulating boom replaces the Snorkel AB60 with improved drive and lift performance — particularly up-and-over clearance — and reduced tail swing. The T66JRT provides a platform height of up to 66 feet, including a 6-foot jib.
Reader Service No. 176 • freeproductinfo.net/rer
Manitou North America
Manitou North America's MRT 2150P rotating telescopic handler has a Tier 3 Mercedes engine and improvements to the cab, including a curved windshield and new instrument panel. All fluids are now housed outside the cab for a cleaner operator environment. The unit offers 10,000 pounds of lift capacity with 67 feet, 7 inches of lift height, continuous rotation and frame leveling to facilitate load placement on jobsites. Hydrostatic transmission, a fully enclosed cab and Manitou Safety System are standard features.
Reader Service No. 177 • freeproductinfo.net/rer
Caterpillar
The TL1255 from Caterpillar has a maximum lift height of 55 feet, and a load capacity of 12,000 pounds. Three steering modes (two wheel, crab and four-wheel steer) offer increased maneuverability.
Reader Service No. 178 • freeproductinfo.net/rer
Potain
The Potain Igo T130 is the largest self-erecting crane in the world, the maker says, with an 8.8-ton maximum capacity. The 164-foot jib can assemble as one section and fold back to a single section for transport, traveling as a single trailer with a length of 56 feet and 12-inch ground clearance. With the jib section folded back, the crane has a maximum radius of 111 feet. Working heights are adjusted by inserting 20-foot lattice sections.
Reader Service No. 179 • freeproductinfo.net/rer
Elliott Equipment Co.
Elliott Equipment Co.'s new 85-foot material handling aerial work platform offers 87 feet of working height on a non-CDL truck chassis. The truck-mounted M85 offers 60 feet of side reach, a 75-pound capacity, 30-foot by 54-foot platform, an internal cable carrier system to deliver options such as electric and hydraulic tool circuits to the platform, and full 180-degree platform rotation. The unit features an optional platform material handling jib with 500-pound capacity. The unit comes standard with an outrigger interlock system.
Reader Service No. 180 • freeproductinfo.net/rer
Global Crane Sales
Global Crane Sales offers Zoomlion's QUY260 crawler crane, designed for general construction, windmill construction, oil rigs and refineries. Maximum lifting capacity is 287 tons, maximum lifting capacity with the luffing jib is 81 tons, and 37.5 tons with the fixed jib. Main boom length range is 65.6 to 272.3 feet and the extended-reach boom ranges from 282.2 to 311.7 feet. The crane is powered by a Cummins QSL9-C305 diesel engine.
Reader Service No. 181 • freeproductinfo.net/rer
Instant UpRight
The Instant RightDeck is a one-piece low-level access platform with a maximum working height of three meters and a capacity of 200 kilos. Designed for low-level tasks, the platform can accommodate two people, work at multiple heights and folded up has compact dimensions that can be transported by car.
Reader Service No. 182 • freeproductinfo.net/rer
Skyjack
The A-Series articulating boomlifts from Skyjack are available in two configurations featuring the 46AJ model with jib (pictured) or the 46A without jib. Both models feature a standard equipped, 360-degree continuous-turret rotation. Zero tail swing complements the turret design facilitating flexibility in tight locations.
Reader Service No. 183 • freeproductinfo.net/rer
