Multiquip

The DLW300ESA welder from Multiquip features constant current and constant voltage, delivering up to 300 amps of DC welding power and providing up to 10.5kW of 120/240-volt AC power. The welder includes thermal overload, water and oil level shut-downs. Multiple electric AC outlets for operator convenience come standard as does a brushless alternator design to lower maintenance requirements, and a self-priming fuel system for instant restarts.

Reader Service No. 180 • freeproductinfo.net/rer

Mi-T-M

The Mi-T-M Model AM2-PY09-30M generator and portable air compressor features 30 gallons of air storage capacity and a 9-hp Yanmar diesel engine. The compressor pump consists of a splash-lubricated cast-iron crankcase, an aluminum head for heat dissipation, a cast-iron cylinder and a large canister intake filter. The unit weighs 430 pounds and comes equipped with a convenient lifting handle as well as two pneumatic tires with tubes and steel hubs.

Reader Service No. 181 • freeproductinfo.net/rer

Subaru

Subaru introduces a new line of diesel generators powered by Hatz 4-cycle, single-cylinder diesel engines. The RGD3300H uses a 6.8-hp Hatz 1B30 engine with a rate output of 3,000 watts, while the larger RGD5000H (pictured) uses a 9.9-hp Hatz 1B40 for a rated output of 5,000 watts. Both models have electric starters with recoil backup, while GFCI receptacles and fuseless circuit breakers protect the current level. Both models also include a full-power switch, voltmeter and 12-volt DC charging, as well as a spark arrestor that lessens both noise and ignition risk. Large 4.4-gallon fuel tanks allow for hours of continuous operation, while a low-oil shutdown system prevents damage to the engine should lubrication levels drop.

Reader Service No. 182 • freeproductinfo.net/rer

Hobart Welding

The Champion 10,000 welder/generator from Hobart Welding Products is powered by a 20-hp twin-cycle Kohler engine or a 22-hp Subaru engine. The unit produces 10,000 watts of peak auxiliary power and a 210-amp constant current, as well as a DC weld output at 60-percent duty cycle. It can run for up to 9 hours on one 10-gallon tank of gas under a steady load of 4,000 watts. The Champion 10,000 features Hobart's patented Field Current Control technology for smooth stick arc starts with minimal sticking of the rod.

Reader Service No. 183 • freeproductinfo.net/rer