Tsurumi

Tsurumi's premium grade TPG Series generator models are available in sizes ranging from 3,000 to 11,000 watts. All generators are powered by Honda GX Series engines with an oversize muffler and air filter for quiet operation, a large fuel tank for extended run time, breaker switches that are protected by our recessed panel, and rubber vibration pads that isolate both the engine and generator side providing for maximum protection and longer life.
Reader Service No. 173freeproductinfo.net/rer

Lincoln Electric

The Vantage 500 Perkins engine-driven welder is available in a compact case sized for truck beds where available space and weight capacity are limited. It is designed to handle the most demanding construction, pipeline, rental fleet or repair applications. All Vantage 500 models feature a standard stainless-steel roof and side panels for reduced maintenance and corrosion resistance, as well as simple controls to minimize training time. It is powered by an environmentally friendly, four-cylinder, 1,800-rpm Perkins turbo-charged diesel engine that runs smooth and quiet while meeting EPA Tier 4i standards.
Reader Service No. 174freeproductinfo.net/rer

Wacker Neuson

Wacker Neuson expands its mobile generator line upwards with 180 kVA and 240 kVA (pictured) sizes. In addition to new clean-burning Tier-3 engines, standard features such as 115-percent fluid containment, crankcase oil vapor recovery system and no-mess oil and radiator drain hoses make these models environmentally friendly. Both models come standard with integrated, long-run fuel tanks. At 100-percent prime kW output, the G 180's 300-gallon fuel tank provides 28 hours of run time while the G 240's 400-gallon tank provides 30 hours of run time.
Reader Service No. 175freeproductinfo.net/rer

Honda

Honda EB series generators come standard with full generator GFCI circuit protection for OSHA-related jobsites. The EB30000c model features Honda's CycloConverter technology, which makes it lighter than other units producing the same amount of power. The EB3800, EB5000 and EB6500 models feature a large 6.6-gallon fuel tank, easy-access outlet panel and an additional duplex outlet.
Reader Service No. 176freeproductinfo.net/rer

Subaru

Subaru introduces two new compact conventional generators, the RGX3000 (pictured) and RGX3800, designed to handle the needs of contractors, homeowners and recreational users. The RGX3000 is powered by Subaru's 6-hp EX17 engine. The unit delivers a maximum output of 3,000 watts and offers 10.3 hours of continuous operation. Powered by the 7-hp EX21 engine, the RGX3800 delivers a maximum output of 3,800 watts and can operate continuously for 9.5 hours. It also features an automatic idle control, which lowers the engine speed when no electrical power is needed, lessening fuel consumption while minimizing noise.
Reader Service No. 177freeproductinfo.net/rer

Atlas Copco

The new QAS 45 generator from Atlas Copco uses a Kubota engine with a Stamford BCI series alternator to deliver 45 kVA and 38 kW of prime power. It is designed for industrial customers, rental companies, public utilities and other construction applications. Standard features include a high-capacity fuel tank, a Zincor steel enclosure that is engineered to withstand extreme weather conditions, large doors and service plates for easy access, 500 hours between service intervals for lower cost of ownership and a 110-percent containment area for fluid spills.
Reader Service No. 178freeproductinfo.net/rer

Winco

Winco introduces the HPS12000HE to its Tri-Fuel portable generator line. This model operates on gasoline, propane or natural gas, and converting from one fuel source to another can be accomplished quickly and easily. The HPS12000HE features a Honda GX620 overhead valve engine with electric start and low-oil protection. The standard 4-wheel dolly kit makes this unit easy to move around on the jobsite or from indoor storage to outdoors for operation.
Reader Service No. 179freeproductinfo.net/rer

Multiquip

The new SmartStick welder from Multiquip is designed with an exclusive feature that automatically shuts off the engine when not in use and restarts it by striking the welding rod. It is equipped with independent controls and up to 200 amps for each operator, or 340 amps for one. Additionally, it provides up to 10.5 kW of 120/240-volt AC power and operates at noise levels of 61.3 dBA. Its arc force control feature allows the operator to fine tune DC current during low voltage welding conditions and helps prevent electrodes from sticking during short-arc-length welding.
Reader Service No. 180freeproductinfo.net/rer

Multiquip

The new SmartStick welder from Multiquip is designed with an exclusive feature that automatically shuts off the engine when not in use and restarts it by striking the welding rod. It is equipped with independent controls and up to 200 amps for each operator, or 340 amps for one. Additionally, it provides up to 10.5 kW of 120/240-volt AC power and operates at noise levels of 61.3 dBA. Its arc force control feature allows the operator to fine tune DC current during low voltage welding conditions and helps prevent electrodes from sticking during short-arc-length welding.
Reader Service No. 180freeproductinfo.net/rer

Doosan Infracore Portable Power

Doosan Infracore Portable Power upgrades several models in its mobile generator portfolio to meet the Environmental Protection Agency's current standards for mobile, off-highway, diesel-powered equipment. The portfolio now includes a total of 10 models ranging from 25 kVA to 570 kVA, all of which comply with current EPA emissions regulations in North America. The G70 (pictured) and G90, rated at 72 kVA and 94 kVA respectively, are powered by John Deere engines that are certified to EPA Tier 3 requirements in effect until 2012 when Tier 4 interim standards become effective. These new models replace the G60 and G80 and feature as much as 24-percent higher output, in addition to cleaner emissions.
Reader Service No. 181freeproductinfo.net/rer

Terex

Terex introduces the all new T240 and the design-enhanced T180 (pictured) generators. A Tier-3-compliant engine, permanent magnet generator, 110-percent environmental spill containment and a shared user interface with all of the Terex generators are standard on both models. The redesigned T180 features a new cabinet design with a double-walled 110-percent spill containment feature. In addition, the new overlapping sheet metal design of the cabinet, also on the T240, reduces noise and water ingress. The T240 provides users with an affordable generator option at 190 kW.
Reader Service No. 182freeproductinfo.net/rer