Little Wonder electric hedge trimmers have two reciprocating blades that glide back and forth for fatigue-free trimming of growth up to ½-inch thick at speeds up to 2,700 cuts per minute. With six models to choose from, both single-edge and double-edge units are available in 19-, 24- and 30-inch cutting blades.
Reader Service No. 146 • freeproductinfo.net/rer
TurfEx, a product division of TrynEx International, introduces the TS-75 commercial-duty push spreader for distributing seed and fertilizer. The TS-75 features a heavy-duty, corrosion-resistant polyehthylene hopper with a 1.3-cubic-foot-capacity. Nylon axle and wheel bearings provide self-lubrication and large gears are constructed of durable Nylatron GS nylon for improved wear and impact strength.
Reader Service No. 147 • freeproductinfo.net/rer
Honda's FRC800 rear-tine tiller features easy tilling operation through simple controls, and one-step tine and drive engagement. A front bumper guard and heavy-duty transmission; debris shield; and controls enhance durability for rental and commercial applications. Powered by a GX Series 4-stroke engine, it offers virtually smoke-free operation with ultra-low emissions. The Cyclone air filter allows for 600-percent longer service intervals.
Reader Service No. 148 • freeproductinfo.net/rer
General Equipment Co.
The 240 hole digger features four-stroke engine technology on a one-man hand-held hole-digging product. A 1.6-hp Subaru EH035 engine supplies the power to the 240 hole digger, making it more fuel-efficient than comparative diggers with two-stroke engines. A Magura twist grip throttle controls the engine speed for optimal power output, and using a highly efficient spur gear transmission, the 240 produces a maximum drilling torque of 55 foot pounds for improved digging performance.
Reader Service No. 149 • freeproductinfo.net/rer
Turf Teq's brush cutter Model 1305BC features a 13-hp Honda engine and is self propelled with a fully hydrostatic forward/reverse transmission. It also features a variable-angle cutting head that allows the operator to cut under fences, trees and other difficult-to-mow areas. A pivoting feature adds stability to the machine on hillsides by increasing the machine's overall ground contact pattern. The deck pivots incrementally to the left up to one foot beyond the handle bars. Model 1305BC also features a multi-use tractor with quick attach that can be converted to operate a power edger, power broom or power rake.
Reader Service No. 150 • freeproductinfo.net/rer
The Allmand TLB compact loader backhoe series features Allmand's exclusive ESL backhoe design and diesel- and gasoline-powered, 20- to 40-hp engines. The ESL design features oversized polished pins with replaceable composite bearings and urethane lip seals in all working joints. This design reduces friction and extends service intervals by eliminating metal-to-metal contact, retaining each joint's grease level and keeping out debris. Dual-cylinder, 180-degree hydraulic cushioned swing allows precise work in tight areas.
Reader Service No. 151 • freeproductinfo.net/rer
The Toolcat 5610 is a utility work machine featuring a three-point hitch and hydraulic power take off for rear implements, and the ability to run more than 40 front-mounted attachments. The Category 1 three-point hitch on the rear of the machine allows landscapers to perform a variety of jobs with three-point implements up to 1,775 pounds. The front lift arm has a rated operating capacity of 1,500 pounds with a PTO kit installed on the machine or if a rear counterweight kit is used. On machines without PTO or rear counterweight kits, the ROC of the front lift arm is 1,300 pounds.
Reader Service No. 152 • freeproductinfo.net/rer
For more outdoor power equipment, visit rermag.com.