The B Series loader backhoes from New Holland include six models — B90B (pictured), B95B, B95B TC, B95B LR, B110B and B115B — that range in gross horsepower from 95 to 100 and feature Tier-3-certified, turbo-charged, 4.5-liter engines. The backhoe models offer breakout forces ranging from 12,169 to 15,212 pounds. The curved boom design lowers the transport height by 6 inches and allows for greater digging forces and digging depths, and the one-touch, flip-up hood is easy to open and provides easy maintenance access.
Reader Service No. 174 • freeproductinfo.net/rer
John Deere offers Total Machine Control on its 310SJ (pictured) and 410J backhoe loaders to improve operator comfort and provide faster cycle times. Armrest-mounted joystick controls turn with the seat and eliminate pilot towers, enhancing visibility, comfort and reducing heat in the cab, thanks to the absence of hydraulic oil used in other control systems. Total Machine Control also eliminates foot pedals and extra levers to control the stabilizers. Now, the extendable dipperstick and front/rear auxiliary hydraulics are all controlled within fingertip reach of the joystick.
Reader Service No. 175 • freeproductinfo.net/rer
Offering increased durability and maneuverability, the new and improved Toro backhoe attachment, for use with Dingo compact utility loaders, is designed for digging, loading, trenching, backfilling and demolition. The Toro backhoe comes standard with a 13-inch-wide bucket and features a maximum digging depth of 82 inches and a 78-inch, two-foot, flat-bottom digging depth. Compared to previous models, the new unit offers a wider swing arc and bucket rotation, both of which measure a full 180 degrees.
Reader Service No. 176 • freeproductinfo.net/rer
Terex TXH Series hydraulic hammers are designed for complete compatibility with Terex compact excavators and loader backhoes. Hammers in the TXH Series are vibra-silenced, via the polymer suspension pad, to reduce total operator and carrier machine vibration exposure. The TXH hammers' high-blow energy is constant throughout the engine rev range and has a low susceptibility to back pressure.
Reader Service No. 177 • freeproductinfo.net/rer
The M Series 3 line of loader backhoes from Case includes five models ranging in net horsepower from 79 to 109 with dig depths from 14 feet, 3 inches, to 20 feet, 4 inches. All Case M Series 3 models feature Case Family IV engines with Tier-3 certification. Electronic engines with high-pressure common rail injection on the Super M and Super M+ models improve cold starting and fuel efficiency. The Super M+ models also feature pressure-compensated load-sensing hydraulics to improve fuel efficiency. The M Series 3 loader backhoes are now available with one-touch idle built into the Case pilot controls.
Reader Service No. 178 • freeproductinfo.net/rer
The TLB-6235 is Allmand's first compact tractor loader backhoe featuring four-wheel drive. A 35-hp, liquid-cooled Isuzu diesel engine powers the TLB-6235. The full-time mechanical four-wheel drive system functions through a hydrostatic transmission, which features a servo-control system that provides positive, neutral and infinite control of the machine as well as reduced pedal effort in forward or reverse mode. Allmand's Extended Service Life backhoe design features oversized pins with composite bearings and urethane lip seals in all working joints to reduce friction and extend service intervals by eliminating metal-to-metal contact. The TLB-6235 has a 6,000-pound bucket digging force, a 9-foot, 10-inch dig depth and a dual-cylinder, 180-degree hydraulic cushioned swing.
Reader Service No. 179 • freeproductinfo.net/rer
The Bradco 485 backhoe by Paladin Construction Group is designed to increase the utilization of skid-steer loaders and tractors. At 665 pounds without a bucket, its compact size makes it easy to maneuver around the jobsite. The 180-degree dual-cylinder swing rotation provides equal power in both directions. The unit provides a maximum digging depth of 8 feet, 5 inches, and is compatible with bucket sizes from 10 to 24 inches.
Reader Service No. 180 • freeproductinfo.net/rer
The M06 backhoe attachment for Bobcat's mini track loaders has the power and digging depth to install underground utilities as deep as 11 feet. Its 36-inch width enables it to perform jobs in confined areas. The M06 backhoe fits on all Bobcat mini track loader models (MT52 and MT55) and is available with bucket widths from 9 to 39 inches. It is designed for landscaping and nursery work, sewage systems and septic tanks, water and power lines, and other excavation jobs.
Reader Service No. 181 • freeproductinfo.net/rer