Designed for heavy breaking applications and demolition work at floor level, Hilti's TE 3000-AVR breaker weighs 65 pounds and delivers 50 foot-pounds of impact energy to break up to six tons of material per hour. Advanced electronics are designed for the tool to work with generators and be less sensitive to voltage drops caused by long extension cords. Sub-chassis active vibration reduction cuts vibration and reduces fatigue. Active cooling system reduces wear and tear on motor, electronics and hammering mechanism. Brushless SR motor eliminates need to replace carbon brushes. Hilti offers a Lifetime Service Agreement.
Reader Service No. 149 • freeproductinfo.net/rer
Stone Construction Equipment
Stone Construction Equipment's Groutzilla Placement System is designed to place grout in blocks, walls, forms and foundations. A low-cost alternative to grout pumps, the unit can be used on applications with more than 5,000 blocks. Working with a telehandler or large forklift, the Groutzilla handles slumps and is designed to fill multiple courses of block spanning 20 feet or more in minutes. The system is designed to virtually eliminate wasted material remaining in the hopper.
Reader Service No. 150 • freeproductinfo.net/rer
Allen Engineering Corp.
Allen Engineering Corp.'s E-Screed is a precision-engineered, lightweight wet screed powered by a LiFeP04 lithium iron phosphate 36-volt battery. The high-frequency screen is designed to produce uniform vibration distribution over the entire blade length. The unit can be charged anytime and can be used with Magic Screen blades.
Reader Service No. 151 • freeproductinfo.net/rer
The zero-tail-swing, 72-hp Terex TC75 compact crawler excavator can handle 3.2- to 13.2-square-foot bucket capacities, and is designed for use with a hydraulic hammer. The 92-inch-wide dozer blade is independently controlled from the track drive for uninterrupted operation. With a flip of the switch, operators can change from ISO to SAE controls. The unit weighs 17,420 pounds and has a maximum digging depth of 14 feet, 7 inches and maximum reach of 24 feet, 5 inches.
Reader Service No. 152 • freeproductinfo.net/rer
Bobcat's 18- and 24-inch-wide planer attachments offer increased torque and horsepower compared with the models they replace. The attachments are compatible with all high-flow Bobcat skid-steer and compact track loaders. The cutting drums can be unlocked to allow oscillation up to 15 degrees in either direction, optimizing surface tracking on rutted or potholed surfaces. Units have been redesigned so that the left skid is visible to the operator, allowing the planer to be kept closer to the center of the carrier. Hydraulic side shift on both models has been increased from 26 to 29.8 inches.
Reader Service No. 153 • freeproductinfo.net/rer
Equipment Development Co.'s CONTRx Systems are designed to speed up the company's concrete polishing systems with new quick-change accessory systems that repair, refurbish and polish residential and smaller commercial concrete floors. The systems are combined with Superabrasive tools. EDCO expanded its Turbo Grinder accessory line; the accessories slide onto Turbo Grinders and stay on magnetically; other accessories can be slid on as needed. Diamond-Dot accessories remove coatings and smooth rough concrete surfaces.
Reader Service No. 154 • freeproductinfo.net/rer
Makita's new 5-inch concrete planer, model PC5001C, features an adjustable front roller and auxiliary base, and is designed for smoothing concrete surfaces and leveling concrete seams. The electronic speed control is engineered to maintain constant speed under load, and the current limiter protects the motor from overheating. The unit includes a dust-collecting vacuum port for cleaner operation, and a removable dust shroud cap that allows the tool to plane in corners and against walls.
Reader Service No. 155 • freeproductinfo.net/rer
The F-Series, direct-drive, walk-behind power trowels from Arrow-Master has a lower center of gravity that provides for less wobble and side torque. Direct drive provides for more power to the blades. A fully enclosed spider assembly protects the blade arm and pitch-control components, allowing for faster clean-up. Available in 30-, 36-, and 46-inch diameters, with a range of engines and horsepower ratings. A heavy-duty gear case is standard.
Reader Service No. 156 • freeproductinfo.net/rer
General Equipment's SG12/E single-head surface grinder is powered by an enclosed fan-cooled 1.5-hp electric motor, and features a single rotating disc with a 12-inch-wide working width. With a top-disc rotation speed of 250 rpm, applications include grinding concrete surfaces, removing mastics, adhesives, epoxies and urethanes, breaking up deposits of grease and dirt, removing rubber carpet backing and industrial residues, and polishing terrazzo and marble floor surfaces. The unit includes a folding handle that facilitates transporting in smaller vehicles and maneuvering up and down stairwells.
Reader Service No. 157 • freeproductinfo.net/rer
The cure sprayer trailer from E-Z Drill, constructed entirely of heavy-duty steel, is designed to cure concrete while preventing shrinkage and cracking. The unit runs on a 5-hp Honda engine and a Roper pump. The self-loading pumps cure directly from a barrel to the machine's 100-gallon tank within about 15 minutes. The unit adapts to varying temperatures and moisture levels. The highway-rated trailer features fork tubes and a 2,000-pound rated axle. The 40-foot-long half-inch sprayer hose has an adjustable nozzle to control the amount and distance of the cure spray for consistent coverage on varying slab sizes.
Reader Service No. 158 • freeproductinfo.net/rer
The hammer mechanism from Bosch's new Brute Breaker Hammer BH2760VC provides up to 60-percent more impact energy than its predecessor 11304, while reducing vibration levels up to 50 percent, the company says. Weighing 65 pounds, the unit delivers up to 68 foot pounds of impact energy. Using patented Active Vibration Control technology, Bosch has a longer air cushion built-in to the hammer mechanism to reduce vibration levels at the source.
Reader Service No. 159 • freeproductinfo.net/rer
MBW walk-behind power trowels feature the industry's heaviest bearings, output shafts, gears, spiders and blade arms, the maker says, to lessen vibration. Handles are up to 6 inches longer for better leverage and to absorb trowel torque. MBW offers 24-, 36-, and 46-inch trowels. There are no wear surfaces to snag cable. Handle, kill switch, rotating and stationary guardings are industrial chrome-plated to facilitate cleaning and corrosion resistance.
Reader Service No. 160 • freeproductinfo.net/rer
Wacker Neuson's CRT 48-35L-PS power steer ride-on trowel combines hydraulics and electronics to produce the results of a hydrostatic machine with the responsiveness of a mechanical steer trowel. The unit features a steering mode switch that allows operators to select the response of the joysticks to meet their preferences. New features include an adjustable 21-inch-wide seat with increased leg room. The unit is powered by a 35-hp Lombardini diesel engine and offers high-speed range of 25 to 165 rpms.
Reader Service No. 161 • freeproductinfo.net/rer
Multiquip's HHX series of ride-on trowels feature a patented swing-away upper frame design for simplified maintenance. Continuously variable transmission is designed for optimum performance during pan floating or final finishing. Six, 55-watt Hella halogen lights provide illumination for nighttime and indoor work. Proportional hydraulic steering offers improved responsiveness with minimal effort on the part of the operator.
Reader Service No. 162 • freeproductinfo.net/rer